Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
POWER j / Turn on/off the clock radio. Switch the clock radio to standby mode. TUNING +/ Tune to an FM radio station. k OK/ Adjust minute and hour format. Skip to previous/next track. Search within a track. Star t/pause play. & English EN 9 3 Get started Always follow the instructions in this chapter in sequence. Install remote control battery Caution . Risk of explosion! Keep batter ies away from heat, ) . Danger of explosion if batter y is incorrectly replaced. Replace only with the same or equivalent type. . The batter y contains chemical substances, so it should be disposed of properly. Keep children away from the batter y. Remove the protective tab to activate the batter y. To replace the battery, refer to the illustration. C Connect power Caution . Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. . Risk of electric shock! When you unplug the AC adapter, % ) cord. Warning . To reduce the r isk of fire or electric shock, do not expose this clock radio to rain or moisture. Connect the power adapter to the wall socket. D Set clock 1 In standby mode, press and hold SET TIME for two seconds to activate clock setting mode. » The hour and minute digits begin to blink. 2 Press / and / repeatedly to set the hour and minute. 3 Press SET TIME » [12H] or [24H] begins to blink. 4 Repeat Steps 2-3 to select 12/24 hour format. » The set time is displayed. Note . When iPod/iPhone is connected, the clock r adio synchronizes time from the iPod/iPhone automatically. Turn on Press . » The clock radio switches to the last selected source. Tip . To select a source, press SOURCE repeatedly or the source selection buttons on the remote control. Switch to standby mode Press again to switch the clock radio to standby mode. » $ display panel. 10 EN 4 Play from iPod/ iPhone You can enjoy audio from iPod/iPhone through this clock radio. Compatible iPod/iPhone The clock radio suppor ts these iPod and iPhone models: Made for. iPod touch (1st, 2nd, 3rd, and 4th iPod classic iPod with video iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th iPod with color display iPod mini iPhone 4 iPhone 3GS iPhone 3G iPhone Listen to audio from iPod/iPhone 1 Place the iPod/iPhone in the dock. E 2 Press SOURCE repeatedly or DOCK on the remote control to select iPod/iPhone mode. 3 Star t to play audio from the iPod/iPhone. To pause/resume play, press . To skip to a track, press / . To search during play, press and hold / , then release to resume normal play. . To navigate the menu: press MENU, then press / to select, and press OK Remove the iPod/iPhone F Pull the iPod/iPhone out of the dock. Charge the iPod/iPhone When the clock radio is connected to power, the docked iPod/iPhone star ts charging. Adjust volume You can adjust volume by pressing VOL +/repeatedly. English EN 11 5 Listen to FM radio Tune to FM radio stations Tip . Position the antenna as far as possible from TV, VCR, or other radiation source. . For better reception, fully extend and adjust the position of the antenna. 1 Press FM to select FM tuner source. 2 Press and hold TUNING +/- for two seconds. » The clock radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more radio stations. To tune to a station manually: 1 Press TUNING +/- repeatedly until you Store FM radio stations automatically You can store a maximum of 20 FM radio stations. In tuner mode, press an hold PROG for two seconds. » The clock radio stores all the available FM radio stations and broadcasts the Store FM radio stations manually 1 Tune to an FM radio station. 2 Press PROG. » The preset number begins to blink. 3 Press PRESET +/-or TUNING +/repeatedly to select a number. 4 Press PROG 5 Repeat steps 1 to 4 to store other stations. Note . To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press PRESET +/-or TUNING +/- repeatedly to select a preset number. 12 EN 6 Other features Set alarm timer Set alarm In standby mode, you can set two alarms to ring at different time. Note Make sure that you have set the clock correctly. 1 Press and hold AL1/AL2 for two seconds to activate alarm setting mode. » The hour and minute digits begin to blink. 2 Press / and / repeatedly to set the hour and minute. 3 Press AL1/AL2 Select alarm source Note . For alar m sound, you can select buzzer, your last listened radio chanel, or latest played audio in your iPod/iPhone. Adjust AL1/AL2 RADIO·BUZZ·DOCK control to select alarm source for both alarms. Tip . When alarm time comes, the selected radio, buzzer, or iPod/iPhone turns on. . If iPhone is selected as alarm source, while no iPod/ iPhone is connected, the clock radio switches to buzzer source instead. Activate/deactivate alarm timer 1 Press AL1/AL2 to view alarm settings. 2 Press AL1/AL2 again to activate or deactiv...