Figure 41 ©American Audio® - - Radius 3000™ Instruction Manual Page 30 Built-in effects The Radius 3000™ comes with eight built in effects. These effects can be used one at a time or you may choose to overlap the effects and use up to four at a time. The Built-in effects include Scratch, Filter, Echo, Trans, Skid, Phase, Flanger, and Pan. You can choose to use the effects with their default parameters or you may choose to customize each effect by changing the parameters. The parameter values for

3/05 CONTENTS CONTENTS 3 ELECTRICAL PRECAUTIONS................................................................................................................4 SAFETY INSTRUCTIONS.......................................................................................................................5 VOLTAGE SELECTOR............................................................................................................................5 UNPACKING................................................

(This will enable the Fader “Q” Start function - See “Q” start control page 7). 4) Connect the supplied D-Plug control cables from the transport unit to the controlling unit. Be sure to transport drive one is connected to controlling unit one and transport drive two is connected to controlling drive two. CAUTION: • Be sure to use the supplied mono 1/8" control cables. Using other types of cable may result in unit damage • To avoid sever damage to the unit, be sure the power is off when making co

90058 Rev. 4/05 CONTENTS CONTENTS 3 ELECTRICAL PRECAUTIONS................................................................................................................4 SAFETY INSTRUCTIONS.......................................................................................................................5 VOLTAGE SELECTOR............................................................................................................................5 UNPACKING.....................................

2. No permita que la unidad tome contacto con sustancias tales como insecticidas, bencina o diluyente. 3. No debe desarmar la unidad ni realizar ningun tipo de modificacion, o de lo contrario la garantia de fabrica perdera validez. 4. Nunca conecte esta unidad a un regulador de intensidad de luz (dimmer pack). 5. No intente poner en funcionamiento esta unidad si se encontrara danada de cualquier manera. 6. Esta unidad esta disenada para ser utilizada en interiores; si se utiliza en espacios abie

The maximum pitch bend percentage allowed is +/- 100%. The pitch bend function will work in conjunction with the PITCH SLIDER (5) pitch setting. For example, if the PITCH SLIDER (5) is set to a 2% pitch gain the pitch bending process will begin at 2% and will continue to the maximum of +/- 100%. NOTE: A -100% pitch manipulation will stop playback entirely. Holding down or tapping on the (+) PITCH BEND BUTTON (7) will provide a speed bump in the playback pitch. Holding down or tapping on the (-)

Note: Memory cues are erased automatically when a new CD is played, or by holding memory button down for 5 seconds. (g) JOG WHEEL PITCH BEND: During normal playback, the inner jog wheel acts as a momentary pitch bend. Turing the wheel in a clockwise direction will increase the speed and turning the wheel in a counter-clockwise direction will decrease the speed. (h) SCRATCH BOX COMPATIBLE: This feature is used in conjunction with the optional American Audio® Scratch Box.™ mixers that also feature

90058 Revised 02/02 SCD-100™ Operating Instructions American Audio® 4295 Charter Street Los Angeles Ca. 90058 Revised 02/02 ©American Audio® --SCD-100™ Instruction Manual Page 2 American Audio® --SCD-100™ Instruction Manual Page 2 CONTENTS CAUTIONS REGARDING HANDLING....................................................................................................4 PRODUCT INFORMATION................................................................................................................

For example, if the pitch slider (5) is set to a 2% pitch gain the pitch bending process will begin at 2% and will continue to the maximum of +/- 16%. Holding down or tapping on the (-) PITCH BEND button (9) will provide a slow down in the playback pitch. Figure 25 Holding down or tapping on the (+) PITCH BEND button (9) will provide a speed bump in the playback pitch. Figure 26 Pitch bend buttons (9): The (+) PITCH BEND button (9) will increase track playback speed and the (-) PITCH BEND button

Also, the "Flip-Flop" function can work with the cd player connected directly to speakers, without the mixer. With “Flip-Flop™” you can have one disc drive begin playback when the other ends. You can “Flip Flop™” single tracks, or entire discs. NOTE: When the cd player is connected directly to the speaker, without a mixer, the player can only "Flip-Flop" in single mode. It cannot "Flip-Flop" entire discs. To "Flip-Flop" entire discs, the player must be connected to a mixer. FLIP-FLOP™ connection