3. Asemble todos los accesorios. Empieze a atornillar los adaptadores a la tapa manualmente. Usando una llave ajustable aprietelos firmemente. NO APRIETE CON EXAGERACION. Mas o menos una rosca debe permanecer visible. Quite las tuercas de compresion de los accesorios. 4. Mida la tapa ensemblada (como lo demostramos con una X en el diagrama) sin las tuercas de compresion y tiene que substraer 1pulgada/25mm de la tuberia de 3/4 de pulgada/19mm o 1-1/2 pulgada/38mm de la tuberia de 1/2 pulgada/13mm

• Single, Duplex, Triplex, or Quad Configurations • Regeneration initiation by choice of time clock, meter or differential pressure switch. • Carbon Filters – For reduction of organics (flow rates up to 39gpm), or chlorine (flow rates up to 77gpm). • Depth Filters – Flow rates up to 193gpm. • Top-Mounted Control Valve – Keeps plumbing connections simple and adaptable. Full flow porting with rounded orifices and wide-open cartridges promote good flow characteristics and low pressure fluctuations.

Wet Tap Assembly: Provides a safe and fast method of removing a flow sensor element without shutting off flow and pressure. (Maximum Pressure – 100 psig @ 680F; Maximum Temperature – 140°F @ 25 psig) High Temperature/Pressure Applications: Contact factory for pressures up to 1,500 psig and temperatures up to 300°F for stainless steel flow sensors. ** Threaded Tee Sch 40 Galv. Pipe Flow Rate Range Table *** Cast Iron Saddle Sch 40 Pipe Installation Fitting Pipe Size – (Inches) Cv Factor Flow Ra

In addition, tanks carry a limited 5-year warranty.* * See printed warranty for details. Culligan will provide a copy of the warranty upon request. System Specifications Pressure: 30–100 psig 207–690 kPa Power: 120 VAC/24 VAC 50/60 Hz Temperature: 40–120°F 4–49°C Water Quality Backwash Flow Rate Valve Size Superior* High** Utility*** Flow Rate Pressure Flow Rate Pressure Flow Rate Pressure Model (GPM) Loss (PSI) (GPM) Loss (PSI) (GPM) Loss (PSI) (GPM) (inches) HD-202 22 2 33 3 44 5 30 2 Depth Fi

A wide variety of installation fittings are available to assure compatibility with many commonly used plumbing materials: •Threaded galvanized •Copper sweat •PVC; CPVC •Iron •Steel The XLF flow sensor package is comprised of: •One (1) paddlewheel insertion type flow sensor element sized for the specified pipe diameter •One (1) installation fitting for the specified pipe type and size. How It Works The solid state paddlewheel flow sensor works on a simple, but precise, electro- mechanical princip

Failure to do so may result in cracking of the filter and water leakage. NOTE: Make certain that installation of this system complies with all state and local laws and regulations. FOR COLD WATER USE ONLY. MAINTENANCE: Contact your area retailer for replacement cartridges and pricing or call Culligan Customer Service at 800-634-1455 for the nearest dealer. Change cartridge every 2500 gallons or approximately every 12 months. Filter Installation Instructions (For copper or plastic tubing) NOTE:Sh

As a manufacturer, we do not know the characteristics of your water supply or the purpose for which you are purchasing this product. The quality of water supplies may vary seasonally or over a period of time, and your water usage rate may vary as well. Water characteristics can also differ considerably if this product is moved to a new location. For these reasons, we assume no liability for the determination of the proper equipment necessary to meet your requirements, and we do not authorize oth

01881923 Rev. D 01/06/03 DCO# 5378 Culligan® Preferred™ Series Drinking Water Filters Installation, Operation, and Service Guide SPECIFICATIONS Operating Pressure Range: 10 - 125 psi (0.7 bar - 8.6 bar) Operating Temperature Range: 35 - 100°F (2 - 38°C) Service Flow Rate: 0.5 gpm (1.9 Lpm) Capacity: 750 gal. (2,839L) Preferred 150 1000 gal. (3,785L) Preferred 250 300 gal. (1,135L) Preferred 350 For cold water use only NSF/ANSI 42 NSF/ANSI 53 ANSI ACCREDITED CERTIFICATION PROGRAM NSF's Certificat

It is recommended that, before installing a water treatment system, you have your water supply tested to determine your actual water treatment needs. This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42/53. Model FM-15 Substance Influe

† Contiene un control de flujo de 0.6 gpm/2.3Lpm. Para usar con un grifo separado (FT-10) en las instalaciones debajo del fregadero. NOTA: substancias reducidas no se encuentran en su agua necesariamente. El sistema y el cartucho filtrante se deben mantener de acuerdo con las instrucciones del fabricante. Instrucciones De Instalacion Y Funcionamiento Filtro de Agua Para Instalar debajo del fregadero Modelo US-550 1 Asistencia Tecnica: 1-800-645-5426 (M-F 7:30 am - 5:00 pm CST) 11/03 145765 Rev C