• Damage to hearing if effective ear protectors are not worn. Wear goggles Wear ear muffs Wear a breathing mask Contents of carton • 1/2” Impact wrench • Kitbox • Instruction manual Assembly The GMC impact wrench is packed, fully assembled except for the impact socket. Please select the required impact socket and insert correctly (refer to the socket change section of this manual). Know your product 1. Drive Shank 2. Trigger Switch 3. Replaceable Brushes 4. Handle/Grip 5. Power Cord 3 1 2 4 5 Un

There are 3 levels of charge low, medium and high. When the battery indicator is showing only 1 LED (low) the battery should be removed and put on the charger. LED Work area light The drill has 3 LED lights (11) to illuminate the work area and improve vision when drilling in areas with insufficient light. To turn the LED lights on and off depress the LED light switch (13). Using the drill Use the forward/reverse switch (4) to select the direction of rotation, then pull the trigger (3). This trig

• The battery can be charged or operated at temperatures between 0° C and 40° C. NEVER CHARGE YOU LITHIUM ION BATTERY BELOW OR ABOVE TEMPERATURES RECOMMENDED OTHERWISE FIRE OR SERIOUS DAMAGE TO THE BATTERY PACK MAY OCCUR. The most suitable temperatures to charge the battery pack are between 20 - 25° C. • If you wish to charge a second battery pack, unplug the charger from the mains supply and leave it for at least 15 minutes. After this time you can charge a second battery pack. Additional safet

Choose the proper volume you like_ Press VOL+/- button to adjust the volume. VOLUME 50 If the color of one channel is abnormal It might be because the color has been set improperly.You may follow the instruction below to adjust it. Press SYSTEM button, and you can see the form. • If the color of the picture is abnormal Press CH+/- button, and move the indicator to COLOR, and press VOL+/- button to select the proper color(AUTO, NTSC3.58,NTSC4.43 and PAL will appear alternately). Generally, pl

Press the digit button of the preset channel (limited to one digit) , you can - complete the selection of channel while you turn on the TV set( To operate the preset of TV channel, please see TUNING on page 11-14). 2. When you do not use the remote control, you can directly press the CH+/- button on the television to call off the standby status. 3. Press the (!) button on the remote control to get into the standby state. 4. Press the © button on the TV set to completely turn off the TV. Po

For shower, you need to quit Medium Warm mode, and press Mode button to enter Real-time Heating / Keeping mode.Then the water can be heated to the setting temperature in a short time.). When water temperature decreases to 34 , machine automatically restarts heating. Heating power level can be manually set with Power button. Example: Fig. 10 shows Medium Warm mode. Press Power button to set power level 2150 W with corresponding indication lighted. The actual temperature then is 52 . When it decre

Then press CH+/- button to move the indicator to B.B, and press VOL+/- button to set it ON. O O PICTURE ADJUST 3A FILTER B.B ON SELECT ADJUST ¥4 | Setting the other Function(continued) Curtain function,calendardisplay How to use the Curtain function •This TVset provides three types of Curtain function for you toselect. 1. Press MENU button until select FUNCTION menu,press CH+/-to select SPECIAL and VOL+/-to enter. ED FUNCTION TIMER 4 AUTO OFF ON S.C.C OFF SPECIAL 4 2. Press CH

Rotate it sufficiently for the chuck to open far enough to accept the bit or accessory. 3. Fully insert the bit or accessory into the chuck (1) and tighten securely by rotating the chuck clockwise with one hand whilst holding the spindle lock button (9) pressed with the other hand. WARNING. Do not attempt to tighten the chuck by gripping the front part and turning the drill on. Damage to the tool and personal injury may result. Be sure to tighten the chuck with the spindle lock button held press

Black Cyan Magenta Yellow Code: MX1G100 Date: 060223 Edition: 07 Op: DCR 1000W 13mm HAMMER DRILL MX1G100 INSTRUCTION MANUAL Black Cyan Magenta Yellow Code: MX1G100 Date: 060223 Edition: 07 Op: DCR 1000W 13mm HAMMER DRILL MX1G100 INSTRUCTION MANUAL ContentsContents Warranty 2 Description of symbols 3 Specifications 3 Safety instructions 4 Additional safety rules for drills 5 Contents of carton 6 Unpacking 6 Know your product 7 Auxiliary handle and depth gauge 8 Inserting and removing bits 8 Opera

The switch is equipped with a brake, the chuck will stop as soon as the trigger switch is fully released. To stop the drill, release the trigger switch. Forward/Reverse control The forward/reverse control (4) allows you to change the direction of the tool while the variable speed trigger is not depressed. To select forward rotation depress the control (4) toward the left side of the tool. To select reverse depress the control (4) to the right side of the tool. Drilling uses the forward mode. The