Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
The recorder must receive programme position information (e.g., SMARTLINK information) for station names to appear automatically. Press ,, then press repeatedly. 2 Press M/m to select the programme position number to swap for the one selected in step 1, and press ENTER. The programme position numbers are swapped. • To swap the programme position number of another station, repeat from step 1. Video Settings (Video In/ Out) You can adjust items related to the image, such as size and colour, according to the type of TV, tuner, or decoder connected to the recorder. Input Colour System Selects the colour system when picture noise appears after you change the “Input Line System” setting (page 101). Auto Recorder automatically detects signals of colour systems and selects the appropriate colour system. PAL Selects the PAL colour system when “Input Line System” is set to “PAL/ SECAM.” SECAM Selects the SECAM colour system when “Input Line System” is set to “PAL/ SECAM.” z Hint When “Input Line System” is set to “NTSC,” you can select “Auto,” “3.58NTSC,” or “PAL-60.” Component Video Out Selects the signal format in which the recorder outputs video signals: interlace or progressive, from the COMPONENT VIDEO OUT jacks. b Notes • When you set “LINE 3 Out” to “RGB,” you cannot set “Component Video Out.” • When you connect the recorder to a monitor or projector via only the COMPONENT VIDEO OUT jacks, do not set “LINE 3 Out” to “RGB.” If you set “LINE 3 Out” to “RGB,” in this case, the picture may not appear. • When picture noise appears after you set the recorder to progressive format, hold down x (stop) on the recorder, and press Z (open/close) on the recorder. • No video signals are output when using the HDMI connection. LINE 3 Out Selects a method of outputting video signals for the LINE 3 – TV jack. Video Outputs video signals. S-Video Outputs S-video signals. RGB Outputs RGB signals. b Notes • If your TV does not accept S-video or RGB signals, the image will not be displayed in the selected method on the TV screen even if you select “S-Video” or “RGB.” Refer to the instructions supplied with your TV. • SMARTLINK is available only when “Video” is selected. • RGB signals are not output when using the HDMI connection. Settings and Adjustments Normal(Interlace) Outputs signals in the interlace format. Progressive Outputs signals in the progressive format. Select this when you want to view progressive signals. ,continued LINE 1 In Audio Input Setti...
Otros modelos de este manual:lector de DVD - RDR-HX680 (6.22 mb)
lector de DVD - RDR-HX780 (6.22 mb)
lector de DVD - RDR-HX980 (6.22 mb)