Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
You do not need to press and hold the SHUTTER button on the Wireless Remote Commander. • If you use a Remote Commander (sold separately) that is equipped with a shutter button lock function, you can leave the shutter open using the Remote Commander. Notes • When using a tripod, turn off the SteadyShot function (page 60). • The longer the exposure time, the more conspicuous the noise on the image. • After shooting, noise reduction (Long Exposure NR) will be done for the same amount of time that the shutter was open. You cannot do any further shooting during the reduction. To prioritize the timing of the shot rather than the image quality, set [Long Exposure NR] to [Off] (page 150). • When the Smile Shutter or Auto HDR function is activated, or when [Picture Effect] is set to [HDR Painting] or [Rich-tone Mono.], you cannot set the shutter speed to [BULB]. • If the Smile Shutter, Auto HDR function, or the [HDR Painting] or [Rich-tone Mono.] setting of [Picture Effect] is used with the shutter speed set to [BULB], the shutter speed is temporarily set to 30 seconds. • It is recommended that you start BULB shooting after the temperature of the camera drops to prevent the quality of the image from deteriorating. Selecting a shooting mode 85 Functions available for each shootingmode Functions available for each shootingmode indicates the function available. – indicates the function not available. The functions you cannot use are displayed in gray on the screen. Shoot Mode Exposure Comp. (106) Self-timer (111) Cont. Shooting (111) Face Detection (141) Smile Shutter (145) Auto Port. Framing (143) / (69) – (71) – – – – – – – – – – – – – – – – – – – (73) – – – – – / (76) – – – – – (77) (78) (80) (82) –* (65, 152) * – – * When the exposure mode is set to M, the exposure can be compensated only when the ISO sensitivity is set to [AUTO]. Switching the recording information display (DISP) Switching the recording information display (DISP) DISP button For viewfinder No Disp. Info. Level Histogram • You can display all the information on the screen or the Graphic Display that shows the shutter speed and aperture value as graphs. Selecting the screen mode You can select the desired screen mode. When you switch the screen by pressing the DISP button, only selected screens are displayed. You can set the available screens to be displayed on the LCD screen and the viewfinder separately. 1 MENU button t 2 t [DISP Button(Monitor)] or [DISP Button(Finder)] 2 Select the desired display with v/V/b/B on the multi-selector, then press the center of the multi-selector. Switching the information 3 Press the MENU button. 87 Switching the recording information display (DISP) Switching the recording information display (DISP) The Graphic Display shows the shutter speed and aperture value as graphs, and clearly illustrates how the exposure works. The pointers on the shutter speed indicator (A) and aperture indicator (B) indicate t...
Otros modelos de este manual:Cámaras - SLT-A99V (2.78 mb)