3 Fasten the sidewall angles across the inside top of the side panels using screws. Side wall angles must overlap rear wall angle in corners. 4. Fasten the side wall channel assemblies across the middle of the side panels using screws. Fasten overlaps in rear corners with screws. 5 Fasten the door track assembly (holes on top) across the top of the front wall panels using screws. See the figu re. 9366 \ l _on t """_..-.,_ _ Long Leg Top Opening Facing in Short Leg on Bottom The wall NOTE channel

Hint. The bolts on the ridge cap need to be leR Ioose to move the ridge cap to the side and overlap the ribs of the next roof panel. Continue weather stripping the ridge. NOTE If roof beam holes do not line up with the roof panel holes, shift the building from left to right. If this does not help, your building may not be level. Shim the corners until holes line up. 6869 Weather Stripping Tape 7743 Roof Panel 7743 Roof Panel Q6797Ridge Cap (1) • Parts Needed For • o 7743 Roof Panel (2) Step 17 R

Fasten each set together with one bolt in the center hole. 5 Set the assemblies use them later. aside. You will Rear Wall Angle 118 1/8" 3,0m Side Wall Angles 1115/8" 2,8m ® Parts Needed For O • 9294 Right Roof Beam (4) Roof Beam Assemblies • 9295 Left Roof Beam (4) Step 3 S_6 The roof beams join the two gables and support the roof panels. The main roof beam is made up of four pieces overlapped, back to back at the center. The left and right roof beam assemblies are made up of two pieces. 9295 _

The crimped rib should go under the rib of the panel that follows it. Crimped Rib Underneath 1 Locate all of the wall panels and set each one alongside the building. 2 Fasten the wall panels at the top and bottom with screws. 6515 Detail Showing Center of Panel Screwed to Wall Channel 3 Fasten the center of each panel the wall channel with screws. to 4 Fasten overlapping ribs as before. Panels rest o frame as shown 3olt and nut does not go thru wall channeIat overlap Use bolts and nuts thru wait

CARE MUST BE TAKEN WHEN HANDLING THEVARIOUS PIECES 715500109 TO AVOI D A MISHAP. FOR SAFETY SAKE, PLEASE READ SAFETY INFORMATION PROVIDED IN THIS MANUAL BEFORE BEGiNNiNG CONSTRUCTION.WEAR GLOVES BUiLDiNG DiMENSiONS * Size rounded offtothe nearest foot o WHENHANDLINGMETALPARTS. Exterior Dimensions interior Dimensions Door •Approx. Foundation Storage Area (Roof Edge to Roof Edge) (Wail to Wail) Opening Size Size Sq. Ft. Cu. Ft. Width Depth Height Width Depth Height Width Heigh 10'x12' 121"x1431/4"

Side Roof Trim Lt. Side Roof Trim Side Roof Trim Ridge Cap Ridge Cap Door Track Quantity in Carton 2 2 4 8 2 2 1 1 2 2 12 4 2 2 1 2 2 2 1 2 2 Check List Parts List 8P13 Parts in Carton Two Part Part Quantity Check Number Description in Carton List 5986 2 Rear Wall Angle 10389 Rear Walt Channel 2 9365 Front Wall Channel 2 6635 Roof Beam Bracket 4 10386 Roof Beam 8 10388 Side Wall Channel 4 10391 Side Wall Angle 4 10387 Side Floor Frame 4 8936 Rear Floor Frame 2 9367 Front Floor Frame 2 9009 Gable

* Grey color . Brackets, braces, . 3 shelves hardware included. * Holds up to 85 Ibs. (38kg) Lumber is not included. (even weight distribution) * Some drilling required to fit buildings without mid-wall bracing. THIS PAGE WAS LEFT BLANK INTENTIONALLY THIS PAGE WAS LEFT BLANK INTENTIONALLY Foundation S09 The Foundation For Your Building OPTION 1: ARROW FLOOR FRAME KIT: (orderNo.FB109-ASR68385-A) or Arrow has the best base for your building in this simple kit. It keeps stored items above the groun