See figure 19. 35. Loop the 25" tarp strap under the hose. Hook to the hose hanger rod assembly. See figure 19. FIGURE 20 38. Assemble the hitch plate to the tractor hitch if: a. Your tractor has a square (straight) hitch frame, to help prevent binding. b. Your tractor has a lightweight hitch frame that needs reinforcing for towing the Chip-N-Vac. Use a 1/2" x 1-1/4" hex bolt, a 7/16" flat washer and a 1/2" nylock nut. See figure 21. TRACTORHITCH FRAME(SQUARE) HITCH PLATETRACTORHITCH FRAME(TAPER

PART NO. QTY DESCRIPTION 1 23507 1 Wheel Support 2 63917 1 Rear Tongue 3 63155 1 Front Tongue 4 49974 1 Hose Hanger Rod 5 23985 2 Cart Body REF. PART NO. QTY DESCRIPTION 6 41882 1 Hose 7 62458 1 Tailgate Reinforcement Bracket 8 24897 1 Axle 9 24497 1 Latch Stand Bracket 10 42159 2 Wheels 3 1 2 4 8 1211795 10146 13 CARTON CONTENTS (Mow-N-Vac Carton) REF. QTY DESCRIPTION 1 24679 1 Front Panel 2 24678 2 Side Panels 3 44790 1 Rear Door 4 23836 1 Cross Brace 5 43793 2 Hose Clamp 6 23560 1 Adapter Bra

Add oil before starting the engine. IMPORTANT: The wheel bearings are not prelubricated. Fill the wheel hubs with grease after assembling the wheels to the axle. CAUTION: Read Rules for Safe Operation and Instructions Carefully • Safety • Assembly • Operating • Maintenance • Repair Parts Call 1-800-448-9282 for missing parts or assembly help. the fastest way to purchase parts FORM NO 41184 rev. (6/8/11) PRINTED IN U.S.A. 2 TABLE OF CONTENTS SAFETY RULES...........................................

2. Service air cleaner every 25 hours under normal conditions. Clean every few hours under extremely dusty conditions. Poor engine performance and flooding usually indicates that the air cleaner should be serviced. To service the air cleaner, refer to the separate engine manual. 3. The spark plug should be cleaned and the gap reset once a season. Spark plug replacement is recommended at the start of each season. Check the engine manual for correct plug type and gap specifications. LUBRICATION 1.