Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
. Only use the powerplug supplied. . The powerplug transforms 100-240 volts to a safe low voltage of less than 24 volts. . The powerplug contains a transformer. Do not cut off the powerplug to replace it with another plug, as this will cause a hazardous situation. . Do not use a damaged powerplug. . If the powerplug is damaged, always have it replaced by one of the original type in order to avoid a hazard. . Make sure the powerplug does not get wet. . Charge and store the appliance at a temperature between 5cC and 35cC. C . Never immerse the charging stand in water nor rinse it under the tap. . Do not recharge the shaver in a closed pouch. . Always unplug the shaver before cleaning it under the tap. C . The appliance complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. ENGLISH Charging Make sure the appliance is switched off before you star t charging it. Charging normally takes approx. 1 hour. You can also shave without charging by connecting the shaver to the mains. Charge indications Charging C . When the shaver is being charged, the plug indicator burns continuously. Battery fully charged C . When the battery has been fully charged, the battery indicator starts to blink. Cordless shaving time A fully charged shaver has a cordless shaving time of up to 30 days. ENGLISH Charging the appliance C 1 Put the appliance plug in the shaver. 2 Put the powerplug in the wall socket. 3 Remove the powerplug from the wall socket and pull the appliance plug out of the shaver when the battery has been fully charged. Charging stand You can also charge the appliance by placing it in the charging stand, if provided. C . Place the shaver properly in the plugged-in charging stand. C . Lift the shaver from the stand without tilting it. Removing and inserting the clock 1 Turn the clock anticlockwise (1) ('click') and pull it out (2). C ENGLISH 2 Insert the clock (1) and turn it clockwise C (2) ('click'). Setting the time C . Set the time by pressing the small button at the back of the clock. The time can only be set forward. Replacing the battery 1 Remove the cap.Then remove the battery by means of a miniature screwdriver. C 2 Insert a new battery and put the cap back into place. C C 8 ENGLISH Using the appliance Personal Comfort Control C . The Personal Comfort Control system allows you to adapt the shaver to your skin type. -You can set the shaver to 'Normal' for a fast and comfor table close shave. -You can set the shaver to 'Sensitive' for a comfor table close shave with optimal skin comfor t. C . The 'S' position is best suited for sensitive skin. C . The 'N' position is best suited for normal skin. . The in-between positions are suitable for skin types between normal and sensitive. Shaving 1 2 Switch the shaver on by pressing the on/off button once. Move the shaving heads quickly over your skin, making both straight and circular movements. -Shaving on a dr y face gives the best results. -Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. C C C ENGLISH 3 4 Switch the shaver off by pressing the on/off button once. Put the protection cap on the shaver every time you have used it, to prevent damage. Trimming For grooming sideburns and moustache. 1 Open the trimmer by pushing the slide downwards. The trimmer can be activated while the motor is running. 2 Close the trimmer with your index finger. Cleaning and maintenance Regular cleaning guarantees better shaving performance. The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water ever y time you have used the shaver. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. 10 ENGLISH Every day: shaving unit and hair chamber 1 2 3 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Press the release button to open the shaving unit. C Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. C Make sure the inside of the shaving unit and the hair chamber have been cleaned properly. 4 5 Rinse the outside of the appliance. C Close the shaving unit and shake off excess water. Never dr y the shaving unit with a towel or tissue as this may damage the shaving heads. 6 Open the shaving unit again and leave it open to let the appliance dry completely. C You can also clean the hair chamber without water by using the brush supplied. ENGLISH 11 Every six months: shaving heads C 1 Open the shaving unit, turn the lock anticlockwise (1) and remove the retaining frame (2). 2 Clean the cutters and guards with the brush supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks b...
Otros modelos de este manual:Eléctrico - HQ9140/33 (2.67 mb)