Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
IN THESE CASES, THE WARRANTY IS NOT VALID. THE WARNING TRIANGLE INDICATES ALL IMPORTANT INSTRUCTIONS FOR THE USER’S SAFETY. PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY TO PREVENT SERIOUS INJURIES! HOW TO USE THESE OPERATING INSTRUCTIONS. Keep these operating instructions in a safe place and make them available to anyone else who may use the coffee machine. For further information or in case of problems, please refer to any authorized service centre. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. 6 APPLIANCE ACCESSORIES “Aqua Prima” water filter (optional) Power cable Cleaning brush Brew Group Coffee grounds drawer Socket for power cable Coffee bean hopper Cup stacking surface Power button Service door Coffee bean hopper cover Drip tray Control panel Dispensing head Drip tray + grill and float Hot water / steam spout Water tank Hot water / steam knob Grinder adjustment key INSTALLATION 7 STARTING THE MACHINE Make sure the power button is not pressed and the machine is turned off. Check the machine features on the label on the bottom of the appliance. 1 Lift the cover of the coffee bean hopper. 2 Fill the container with coffee beans. Close the cover placing it correctly on the hopper. 3 Remove the water tank. We recommend installing the “Aqua Prima” water filter (see page 8). 4 Fill the tank with fresh drinking water up to the MAX level. Reinsert the tank. 5 Insert the plug into the socket located in the rear panel of the machine and insert the other end into a socket with suitable current. 6 Firmly push down the power button to turn on the machine. The machine performs a self- test. The machine automatically primes the circuit. If this operation is not completed, proceed manually as described from step 7 to 12. 7 Place a container beneath the steam spout. 8 Press the water button. The indicator light turns on. 9 Turn the knob until the position is reached. 8 “AQUA PRIMA” WATER FILTER 10 Wait until a steady flow of water comes out of the spout. 11 Turn the knob until it is in the rest position ( ). 12 Press the water button again. The indicator light turns off. Remove the container. The machine is ready for use. When the correct temperature is reached, the machine performs a rinse cycle of the internal circuits. A small amount of water is dispensed; during this phase, the lights flash counterclockwise. Wait for this cycle to be completed. “AQUA PRIMA” WATER FILTER (OPTIONAL) To improve the quality of the water you use, it is recommended to install the “Aqua Prima” filter. Before using it, leave the filter immersed in the tank for 30 minutes. 1 Remove the “Aqua Prima” filter from its packaging. Enter the date of the current month. 2 Insert the filter in the empty tank. The reference mark and the groove must match. Push firmly until it is completely inserted. 3 Fill the tank with fresh water. Let the filter soak for 30 minutes. After 30 minutes discard the water in the tank and refill with fresh water. 4 Place a container beneath the steam spout. Dispense the water in the tank using the hot water function (see page 13). 5 Fill the tank again with fresh drinking water. The machine is ready for use. CONTROL PANEL 9 Alarm light to empty the coffee grounds drawer: • permanently on: signals the need to empty the grounds drawer; this operation must beperformed with the machine turned on (steps 4 and 5, page 17). Coffee dose adjusting knob (see page 10). Coffee button: • slow flash:1 coffee has been selected (the button has been pushed once). • quick flash: 2 coffees have been selected (the button has been pushed twice). Hot water button: • off: steam function is selected • on: hot water function is selected Ground coffee quantity button (Opti-dose) (see page 10). Alarm light: • permanently on (one or more events): signals the machine is out of coffee, that the water tank is empty, or the drip tray is full. • on and slowly flashing (one or more events): signals that the Brew Group is notinserted, the grounds drawer is not inserted, the cover of the coffee hopper is not closed, the service door is open. • on and quickly flashing: signals the need to prime the water circuit. Descaling light: • on and flashing: signals the need to perform a descaling cycle (see page 15). Machine ready light: • permanently on: signals that the machine is ready for use. • on and flashing: signals that the machine is warming up. If the and lights flash alternately, switch off the machine and turn it on again after 30 seconds. If this signal appears again, contact the customer service centre. 10 ADJUSTMENTS COFFEE VOLUME ADJUSTMENT PER CUP The coffee volume knob adjusts the amount of coffee brewed per cup. This adjustment has an immediate effect Medium coffee on the selected type of brewing. Long coffee Espresso coffee "AROMA" (OPTI-DOSE) INDICATES THE COFFEE DOSE PER CUP By pressing the key, it is possible to choose either a mild, a medium or Mild aroma a strong coffee. The coffee intensity is adjusted by setting the coffee quantity to be gro...