Votos - 5, Puntuación media: 4.4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Can you see "Not Optimum Mode", "Recommended Mode 1680 X 1050 60 Hz" on the screen? There is no image on the screen. Is the power Solutions Check the power cord connection and supply. (Connected using the D-sub cable) Check the signal cable connection. (Connected using the DVI cable) If you still see an error message on the screen when the monitor is connected properly, check to see if the monitor status is set to analog. Press SOURCE/ button to have the monitor double- check the input signal source. If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP/2000) and then change the frequency of the video card. (Refer to the Preset Timing Modes) If the initial screen (the login screen) does not appear, contact the Service Center or your dealer. You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly. If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1680 X 1050 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum Mode", "Recommended Mode 1680 X 1050 60 Hz" message appears for one minute and then disappears. Please change to the recommended mode during this one-minute period. (The message is displayed again if the system is rebooted.) The monitor is in PowerSaver mode. Press a key on the keyboard to activate the monitor and I cannot see the On Screen Display. The screen shows strange colors or just black and white. The screen suddenly has become unbalanced. The screen is out of focus or OSD cannot be adjusted. LED is blinking but no images on the screen. There are only 16 colors shown on the screen. The screen colors have changed after changing the video card. indicator on the monitor blinking at 1 second intervals? Connected using the DVI cable? Have you locked the On Screen Display (OSD) Menu to prevent changes? Is the screen displaying only one color as if looking at the screen through a cellophane paper? Have the screen colors become strange after running a program or due to a crash between applications? Has the video card been set properly? Have you changed the video card or the driver? Have you adjusted the resolution or frequency to the monitor? restore the image on the screen. If there is still no image, press the 'SOURCE/ ' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen. You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals. Connect the DVI cable and then reboot the system. Unlock the OSD by pressing the [MENU / ] button for at least 5 seconds. Check the signal cable connection. Make sure the video card is fully inserted in it's slot. Reboot the computer. Set the video card by referring to the video card manual. Adjust screen image position and size using the OSD. Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes). The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD. Have you adjusted the resolution or frequency on the monitor? Is the frequency properly adjusted when checking the Display Timing on the menu? Have the Windows colors been set properly? Has the video card been set properly? Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes). Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes. (The maximum frequency per resolution may differ from product to product.) Windows XP : Set the resolution in the Control Panel > Appearance and Themes > Display > Settings. Windows ME/2000 : Set the resolution in the Control Panel > Display > Settings. Set the video card by referring to the video card manual. There is a Have you installed Install the monitor driver according to the Driver message that the monitor driver? Installation Instructions. reads "Unrecognized See the video card manual to see if the Install the monitor driver according to the Driver Installation Instructions. monitor, Plug & Play (VESA DDC) Plug & Play (VESA DDC) function can monitor found". be supported. Check when MagicTune™ does not function MagicTune™ feature is found only on PC (VGA) with * To check whether your PC is available for MagicTune™ feature, follow the steps below (When Windows is XP); properly. Window OS that supports Plug and Play. Control Panel > Performance and Maintenance > System > Hardware > Device Manager > Monitors > After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware. MagicTune™ is an additional software for the monitor. Some graphic cards may not supp...
Otros modelos de este manual:Monitores - 2032BW (3.56 mb)
Monitores - 2032GW (3.56 mb)
Monitores - 2232GW (3.56 mb)