Votos - 4, Puntuación media: 3.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). IMPORTANT Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Troubleshooting Display image is incorrect The screen color is mono or abnormal. The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Have you installed the display driver? Have you installed the display driver? Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: • Make sure to check if the video card supports Plug&Play function. 24 Specifications Display Display W1971SC 19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 48.14 cm 0.285 mm pixel pitch Sync Input Horizontal Freq. 28 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green) Video Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max VESA 1440 x 900 @75 Hz Recommend VESA 1440 x 900 @60 Hz Plug&Play DDC 2B Power On Mode : 34W(Typ.) Consumption Sleep Mode . 1 W Off Mode . 1 W Dimensions With Stand &Weight Width 44.85 cm / 17.66 inches Height 38.64 cm / 15.21 inches Depth 22.09 cm / 8.7 inches Without Stand 44.85 cm / 17.66 inches 32.15 cm / 12.66 inches 5.58 cm / 2.2 inches Weight(excl. packing) 3.99 kg (8.79 lbs) Range Tilt -5°~22° Power Input AC 100-240V~ 50/60Hz 0.8A Operating Conditions Environmental Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing 25 Specifications W1971SC Attached ( ), Detached ( O )Stand Base Wall-outlet typePower cord Standard USB 2.0, Bus-Power Data Rate Max 480 Mbps USB Input Sensitivity 0.7VrmsAudio Video Resolution Max 640 x 480 (VGA) View Angle(Diagonal) 60° Webcam Analog One ChannelMIC NOTE Information in this document is subject to change without notice. 26 Specifications Display Display W2271SC 22 inches (55.867 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.867 cm 0.282 mm pixel pitch Sync Input Horizontal Freq. 28 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green) Video Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max VESA 1680 x 1050 @60 Hz Recommend VESA 1680 x 1050 @60 Hz Plug&Play DDC 2B Power On Mode : 42W(Typ.) Consumption Sleep Mode . 1 W Off Mode . 1 W Dimensions With Stand Without Stand &Weight Width 51.96 cm / 20.46 inches 51.96 cm / 20.46 inches Height 42.81 cm / 16.86 inches 36.41 cm / 14.34 inches Depth 22.07 cm / 8.69 inches 5.59 cm / 2.20 inches Weight(excl. packing) 4.5 kg (9.92 lbs) Range Tilt -5°~22° Power Input AC 100-240V~ 50/60Hz 1.0A Operating Conditions Environmental Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing 27 Specifications W2271SC Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type Standard USB 2.0, Bus-Power USB Data Rate Max 480 Mbps RMS Audio Output 1W+1W(R+L) Audio Input Sensitivity 0.7Vrms Webcam Video Resolution Max 1600 x 1200 (2M) View Angle(Diagonal) 65° MIC Digital Two Channel NOTE Information in this document is subject to change without notice. 28 Specifications Display Display W2271TC 22 inches (55.867 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.867 cm 0.282 mm pixel pitch Sync Input Horizontal Freq. 28 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green) Digital Video Input Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), ...
Otros modelos de este manual:Monitores - W2271TC-PF (1.64 mb)
Monitores - W1971SC-PF (1.64 mb)
Monitores - W2271SC-PF (1.64 mb)