Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 1.73 mb Nombre del archivo: Idioma del manual:

RETURN TO TOP OF THE PAGE Rear View .. 1 VGA input 2 DVI-D input (available for selective models) 3 AC power input 4 Kensington anti-thief lock .. RETURN TO TOP OF THE PAGE.. Optimizing Performance.. ............For best performance, ensure that your display settings are set at 1680x1050, 60Hz. .. .. .. .. .. .. .. Note: You can check the current display settings by pressing the 'OK' button once. The current display mode is shown in OSD main controls called RESOLUTION. RETURN TO TOP OF THE PAGE.. .. .. .. .. .. .. .. .... .. .. .. .. .. .. .. .. .. . Front View Product Description .. . Accessory Pack .. . Connecting to Your PC .. . Getting Started .. . Optimizing Performance .. . The base .. .. .. .. .. .. .. .. .. .. .. .. Connecting to Your PC.. Accessory Pack Unpack all the parts... Power cord DVI cable (Optional) .. VGA cable EDFU pack RETURN TO TOP OF THE PAGE.. Connecting to Your PC .. 1) Connect the power cord to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation. *available for selective models.. *available for selective models.. .. .. .. .. .. .. .. 2) Connect to PC .. (a) Turn off your computer and unplug its power cable. .. (b) Connect the monitor signal cable to the video connector on the back of your computer. .. (c) Plug the power cord of your computer and your monitor into a nearby outlet. .. (d) Turn on your computer and monitor. If the monitor displays an image, installation is complete. .. RETURN TO TOP OF THE PAGE.. .. .. .. .. .. .. .... .. .. .. .. .. .. .. .. .. . Front View Product Description .. . Accessory Pack .. . Connecting to your PC .. . Getting Started .. . Optimizing Performance .. . Attach the Base Stand .. . Detach the Base Stand .. . Remove the Base .. .. .. .. .. .. .. .. The Base Attach the Base Stand 1) Place the monitor face down on a smooth surface taking care to avoid scratching or damaging the..screen. 2) Hold the monitor base with both hands and firmly insert the base stand into the base column. RETURN TO TOP OF THE PAGE.. .. .... Detach the Base Stand Place the monitor face on a safe surface, push down on the release button and pull the base stand away..from the monitor body. RETURN TO TOP OF THE PAGE.. Remove the Base Condition: ............for VESA standard mounting applications Remove the 4 screws covers. .. .. .. .. Remove the 4 screws and then remove the base from the LCD monitor. .. .. .. .. .. Note: This monitor accepts a 100mmx100mm VESA-Compliant mounting interface. .. RETURN TO TOP OF THE PAGE.. .. .. .. .. .. .. .. .. .... .. .. .. .. .. .. .. .. Your LCD Monitor : .. .. . Front View Product Description .. . Setting Up and Connecting Your Monitor .. . Getting Started .. . Optimizing Performance .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. Getting Started Getting Started Use the information file ( .inf) for Windows® 98/2000/XP/Vista or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 98/2000/XP/Vista. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the 'Monitor' dialog box in Windows® 98/2000/XP/Vista and the Plug & Play application can be activated. The installation procedure based on Windows® 98, 2000, XP and Vista is specified as follows. For Windows® 98 ........Start Windows® 98. ........Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. ........Double click on the 'Display' Icon. ........Select the 'Settings' tab then click on 'Advanced...'. ........Select the 'Monitor' button, point to 'Change...' then click on 'Next' ........Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want.' then click on 'Next' and then click on 'Have Disk...'. ........Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button. ........Click on the 'OK' button then select your monitor model and click on the 'Next' button. ........Click on the 'Finish' button then the 'Close' button. For Windows® 2000 ........Start Windows® 2000. ........Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. ........Double click on the 'Display' Icon. ........Select the 'Settings' tab then click on 'Advanced...'. ........Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below. ........Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button. ........Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on 'Next' and then click on 'Have disk...'. ........Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive). ........Click on the 'Open' button, then click on the 'OK' button. ..........

Descargar ahora

Introduzca dos números de la imagen: