Iniciar sesión:
Votos - 4, Puntuación media: 4.8 ( )

Manual de usuario CDA, modelo FW281

Fabricar: CDA
Tamaño del archivo: 595.44 kb
Nombre del archivo: fb3934f8-46bc-4684-a78d-09ed4e78c51b.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


We recommend that you start with the appliance set to position 3. 2. Super freeze switch This freezer is equipped with a super freeze function. This allows the freezer compressor to run continuously and so freezes food more quickly. To select this function, push the switch across until the super freeze indicator light (5) illuminates. To switch the function off, then push the switch back across until the indicator light goes out again. Note that this should not be used for more than 24 hours. 3. Power indicator light This green light will illuminate when the freezer is switched on. 4. Over temperature indicator light This red light will illuminate when the temperature inside the freezer is too high. This may illuminate after the door has been opened, or when fresh food is added and should switch off again once the temperature within the freezer has stabilised. 5. Super freeze indicator light This yellow light will illuminate when the super freeze function has been switched on with the super freeze switch (2). Use • The freezer compartments are designed to store frozen food. • Never put warm or hot foods in the freezer, allow them to cool fully first. • Follow the instructions on the packaging for storage of frozen food. If no information is provided, foods should not be stored for more than three months after the purchase date. • Never put sparkling drinks or bottles of liquid in the freezer as they can explode. Care and cleaning Always disconnect the appliance from the power before any cleaning or maintenance. • The refrigerator section should be cleaned using a solution of bicarbonate of soda and lukewarm water. • Do not use abrasive products or detergents. After washing, rinse and dry thoroughly. • Clean the shelves and balconies separately by hand using soap and water. Do not put them in the dishwasher. • The evaporating tray and water drain hole (at the back of the refrigerator compartment) should be cleaned periodically to prevent the defrosted water from collecting inside the refrigerator compartment. The drain plug can be used to clear the drain hole. • Once cleaning is complete, reconnect the mains power supply. • If the appliance is not used for prolonged periods of time, unplug and clean the appliance. The doors should be left slightly open to prevent the formation of mildew and smell. Defrosting the freezer Do not use heaters or defrosting sprays in this appliance. • Never use any metallic or sharp objects to remove the ice as this could damage the lining. • The freezer compartment should be defrosted regularly to ensure the most efficient running of the freezer. • Once the ice is more than 5mm thick, the freezer should be defrosted. • First remove the freezer drawers. • To speed up the process, place a bowl of warm water in the base of the freezer compartment. Once defrosting is complete, dry the inside of the freezer compartment with a sponge or clean cloth. Troubleshooting If you have any problems with your appliance, you should check the troubleshooting prior to calling CDA Customer Care to prevent unnecessary service calls and potential cost. If the appliance is not working • Check there is power to the appliance: • The house fuses are intact and the fuse in the plug has not blown. • The thermostat is not set to 0 (off position). • The plug socket is functioning fine. To check this, plug another electrical appliance in to see if the socket is working. • The temperature of the room is adequate (10oC or above). The appliance is working, but not very well • The appliance is not overloaded. • The thermostat is set to an appropriate temperature. • The door is closing properly. • The cooling system at the rear of the appliance is clean and free of dust, and not touching the rear wall. • There is enough ventilation at the side and rear walls. • The temperature of the room is adequate (10oC or above). The appliance is noisy • The appliance is level and stable. • The side and rear walls are clear, and there is nothing resting on the appliance. • The cooling gas in the refrigerator will make a slight bubbling noise, even when the compressor is not running. There is water in the lower part of the refrigerator compartment • The drain hole in the channel at the back of the compartment is clear. Installation This appliance must never be installed close to heat sources i.e. heating elements, cookers or in damp places The appliance should be mounted on a piece of wood (for example a section of worktop or kitchen carcass) if a raised floor is to be fitted, if the kitchen floor is to be tiled after installation, or if the installation height of the appliance is greater than 850 mm. Fig. 1 -Dimensions of the appliance. Fig. 2 -Dimensions for installation in adjacent units. fig. 1 fig. 2 Reversing the door It is possible to reverse the door on this appliance, if required. To do so, follow the steps below: • Loosen the hinge fixing screws (1). • Open the door. • Lever off the corner caps (3) with a knife blade....


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría