Votos - 4, Puntuación media: 4.5 ( )

Fabricar: Roland Tamaño del archivo: 454.56 kb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

Instrumentos Musicales - SDE-1000 (985.51 kb)

1125ms). • Highly Accurate CJeiay Time Display (0.1ms step indication.'from 0 to 10ms). • Memory function retaining up to four different panel settings. • Modulation root Control arid 'Preset. Shift Jacks useful for live performance. • • Play Mate Jack that enables delay time setting with , the Foot Control. • The Hold Jack that allows delay sound repetition. • Delay Remote Jack that is useful for turning the •petay'effect on or off. : • The.twin Output Jacks-useful'for stereo performance -such as chorus effect. Contents Panel Descriptions.....................4 Memory Function.....................8 Setting up...........................9 Sample Sounds..................... 10 Original Memo....................... 11 Block Diagram....................... 13 Frequency Characteristic...............14 Specifications....................... 15 Important notes • Be sure to use the voltage shown on the Name Plate on the rear pane). • The SDE-1000 may generate heat during operation, this is quite a normal situation caused by AC power, so there is nothing to worry about it, • Please never disassemble the SDE-1000 even if it breaks down. • if the SDE-1000 is not to be used for a long period of time, unplug the cord from the socket. • Please do not pull the cord but hold the plug when unplugging. • Please avoid placing or dropping anything heavy on the Power Cable. • Operating the SDE-1000 near a neon or fluorescent lamp may cause noise interference. If so, change the angle of the SDE-1000. • Avoid using the SDE-1000 in extreme heat, humidity or where it may be affected by dust. 3 Panel Descriptions ((DELAY TIME» DIGITAL Q€LAV SDE-IOOO c= - INPUT ATT FEEDBACK DELAY OUT | CD * -j iH 5 -v>e, Í , \ ly st\'b yiv C3 0/TV" RATE & MODULATION depth Or Ó -DELAY- lu U U U i LL U: U.LU (3 c?; «FEEDBACK» «INPUT» yjs- (5' JT- 16 s\\ Ce «MODULATION» {(INPUT ATT)) 0 INPUT Attenuator When this knob is set to OdB, the output level is equal to the input level. Set this knob to appropriate level where the Input Level Indicator +6dB lights up at its peak. (Distortion will start at +12dB.) Even this knob is turned fully counterclockwise, the input ievel will not be zero. (2)Input Level Indicators *When the Input/Output Level Selector Switch @ is set to the —20dBm position (-35dBm and the input Attenuator is set to OdB, feeding —20dBm (-35dBm) signal will light up The OB Indicator. ((FEEDBACK)) (f) FEEDBACK Level Knob ON (the Indicator lights up), then adjust the Rate and Depth by using the corresponding knobs (5) and (6). The Modulation Rate Indicator (8) flashes at the same rate as the- LFO Frequency set with the MODULATION RATE Knob *The Modulation Rate Indicator (D remainds flashing whether the MODULATION Switch © is on or (7/DELAY TIME Display CO; DELAY TIME Button HZ) Delay Range Switch with Delay Range indicator Select the delay range with the Delay Range Switch (12) (when "x 2" position is selected, the indicator lights up), then set the delay time with the DELAY TIME Button @ . The current delay time is shown in the DELAY TIME Display (7). 'The DELAY TIME Button is used to set the Delay Time. Pressing the upper part A will advance the figure on the Display, making the Delay Time longer, and pressing V side will shorten it. Pressing one side while holding the other side down will quicken this change. Delay Time Frequency Characteristic OFF (x 1} 0 to 375ms 10 to 17kHz (+^|dB) ON (x 2) 0 to 750ms 10 to 8 kHz {+Q_%6B) ' The Delay Time shown in the Display Window may slightly alter after a while. Even so, there is nothing to worry about it, simply adjust it right. (fj) Mem...

Descargar ahora

Introduzca dos números de la imagen: