Iniciar sesión:
Votos - 4, Puntuación media: 4.3 ( )

Manual de usuario AKG Acoustics, modelo C 414B/TLII

Fabricar: AKG Acoustics
Tamaño del archivo: 1.16 mb
Nombre del archivo: b53c4058-d998-0994-cd6a-d9ed9891f9bd.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Their variety of polar patterns, along with two degress of bass cut and two levels of padding, make them ideal for recording just about any vocal or instrument under any conceivable working condition in the studio. The AKG C 414 B/TLII is the latest of a series of variations on the basic C 414 design and draws from AKG’s early studio heritage, the legendary Model C 12. The CK 12 dual diaphragm capsule has been recreated, with its combination of warmth and presence, and combined with modern solidstate transformerless circuitry. The early CK 12’s were all slightly different in response -- a consequence of individual hand-crafting. Today we bring a higher degree of uniformity to the production line, and the new C 414 B/TLII models are quite consistent in response. Also, an H 100 spider suspension shock mount and W 414 windscreen are included as standard accessories. Specifications Transducer type: Dual diaphragm, 1 in. (25 mm) diameter pressure gradient Diaphragm material: Gold-sputtered mylar foil Frequency response: 20 Hz - 20 kHz (+1.5/-1.0 dB) Polar patterns: Omnidirectional, cardioid, hypercardioid and figure-eight Impedance: 180 ohms Recommended load impedance: greater than 600 ohms Output connector: XLR (pin 2 positive, per IEC standard) Sensitivity at 1 kHz: 12.5 mV/Pa; -38 dB (dB re 1 V) Equivalent noise level (A-weighted): 14 dB (DIN 45412) Sound pressure level for 0.5% THD: 140 dB (160 dB SPL with -20 dB preattenuation) 30 Hz - 20 kHz S/N ratio re 1 Pa (A-weighted): 80 dB Environmental: Operating temperature: 14° F to 140° F (-10°C to + 60°C) Relative humidity: 90% (+20°C), 85% (60°C) Pre-attenuation switch: -10 or -20 dB Low frequency roll-off: 12 dB/octave below 75 or 150 Hz Power requirement: 12 to 48 V phantom power nominal Current consumption: less than 2 mA Microphone size: 5.6” x 1.8” x 1.4” (141 mm x 45 mm x 35 mm) Microphone net weight: 11 oz. (0.31 kg) Shipping weight: 33.6 oz. (0.97 kg) Standard accessories: H100 Spider shock mount W414 Foam windscreen Optional Accessory: SA18/3B Stand adapter H 100 Features • One of the world’s most popular studio 1-inch condenser microphones • Response patterned after the AKG classic C 12 microphone • Four selectable polar patterns (omni, cardioid, hypercardioid and figure-eight) • Operates with phantom powering from 12 to 48 volts nominal • Broad response rise in the 3 kHz range enhances vocal presence in the studio • Includes an H 100 isolation shock mount and W 414 windscreen Architects and Engineers Specifications The microphone shall be a 25 mm condenser type with dual be no greater than 5.55 x 1.77 x 1.37 inches, and the microphone diaphragm construction and with switchable omnidirectional, net weight shall be no greater than 10.93 ounces. The microphone cardioid, hypercardioid and figure-eight polar patterns. The shall include an H 100 isolation shock mount and W 414 diaphragm material shall be gold sputtered foil, and the on-axis windscreen as standard accessories. The microphone shall operate sensitivity shall be uniform for all patterns, and no less than 12.5 over the entire range of phantom powering from 12 to 48 volts. The m...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría