Iniciar sesión:
Votos - 4, Puntuación media: 4 ( )

Manual de usuario Astatic, modelo WM-625

Fabricar: Astatic
Tamaño del archivo: 573.87 kb
Nombre del archivo: 175d36e2-bf71-485f-8030-77a3caa499b4.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Both models have a self-contained, rugged, low impedance dynamic cartridge assembly. The WM-625S has a simple push-to-operate DPDT snap-action switch suitable for almost all switching requirements. APPLICATIONS The Models WM-625 and WM-625S are excellent choices for intercom and P.A. applications in warehouses, factories, schools, restaurants and fast food outlets, apartment houses, security detection, etc. ARCHITECTS' AND ENGINEERS' SPECIFICATIONS The microphone shall be an Astatic WM-625, or WM-625 S. It will be a dynamic moving coil type with a diaphragm made of polyester. The frequency response shall be from 150 to 4500 Hz. The microphone will have an omnidirectional polar pattern. The output level will be -68dB (0 dB = 1 volt / microbar); 4.0 mv/PA. The microphone shall be fitted on a brushed stainless steel plate designed especially for mounting to wall outlet boxes. The WM-625S model will have a DPDT momentary snap-action, push-to-operate switch. The overall dimensions shall be 114.7mm (4 33/64") long; 70.3mm (2 49/64") wide; and 27.4 (1 5/64") deep. The weight shall be 103 grams (3.6 oz.) C€ SPECIFICATIONS FOR WM625 / WM625S Specifications Element: Dynamic Pattern: Omnidirectional Frequency Response: 150 to 4500 Hz Output Level: -62 dB (0dB = 1 volt / microbar) Impedance: 500 ohms Switch: DPDT, Push-to-Operate Snap-action switch Dimensions: See outline drawing on other side Weight: 103 grams (3.6 oz.) Finish: Brushed Stainless Steel FREQUENCY RESPONSE CURVE FREQUENCY IN HERTZ TWO-YEAR LIMITED WARRANTY Omnitronics, LLC (“ASTATIC”) hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event a defect occurs ASTATIC will, at its option, either repair or replace with a new unit of equal or greater value. You should retain proof of purchase to validate the purchase date and return it with any warranty claim. Return warranty claims carefully packed, insured and prepaid to the Service Department - 341 Harbor St. • Conneaut, OH 44030. This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to ASTATIC’s instructions or unauthorized repair. All implied warranties or merchantability or fitness for a particular purpose are hereby disclaimed and ASTATIC hereby disclaims liability for incidental, special or consequential damages resulting from the use or unavailability of this product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you. Note: No other warranty, written or oral is authorized by Omnitronics, LLC. p/n 46873-45-00 revl 5/25/04 JM.S....

Otros modelos de este manual:
Auriculares y micrófonos - WM-625S (573.87 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría