Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
2 In case of multi-channel operation, proper selection of non-interference channels is of utmost importance. 3 Remove batteries out of the microphone if the unit is not to be used for a long period. 4 Tuned circuits and variable resistors & capacitors inside the transmitter and the receiver have been precisely adjusted, please do not make any adjustment. Otherwise, normal operation will be interrupted. Printed in Taiwan, SEP 2001 WIRELESS MICROPHONE SYSTEM Operating Manual R CAUTION 1.Since use of an antenna extremely influences efficiency of the wireless microphone system, proper selection and set-up are necessary. The shorter the better is the most important rule to keep distance between the microphone and the receiiving antenna. 2 In case of multi-channel operation, proper selection of non-interference channels is of utmost importance. 3 Remove batteries out of the microphone if the unit is not to be used for a long period. 4 Tuned circuits and variable resistors & capacitors inside the transmitter and the receiver have been precisely adjusted, please do not make any adjustment. Otherwise, normal operation will be interrupted. Printed in Taiwan, SEP 2001 WIRELESS MICROPHONE SYSTEM Operating Manual R R-1000 / R-2000 is a VHF high-band non-diversity system with quartz controlled fixedfrequency design. The receiver must be combined with Califone's Q- and M- series of wireless microphone. 1. MATCHING WIRELESS MICROPHONE:Q- and M- series such as Q-1000 & M-1000 1. MAIN FRAME:R-1000 / R-2000 2. ACCESSORIES:1)AC adapter 2)antenna X 1(R-1000) /antenna X 2(R-2000) 3)Output cable / PHONE 4)Operating manual OUTLINE FRONT PANEL GENERAL CONTROLS AND FUNCTIONS SYSTEM COMBINATION COMPOSITION 1. Turn volume control of the receiver as well as the mixer or the equipment to be used to the minimum then switch on the receiver. The pilot LED of the receiver will light up and the AF signal indicator will give a flash. 2. When a transmitter is switched on RF signal indicator LED of the receiver will light up indicating that the system is in normal operation. When indicator LED of the receiver does not light up indicating that the system does not match both of the transmitter and the receiver should be checked whether they are in normal operation or not. 3. When a matching transmitter is switched on at distance within 15 meters away from a receiver RF signal indicator LED of the receiver does not light up indicating that the system is matched but is in abnormal operation. 4. When sound is applied to the microphone while the system is switched on and is in normal operation AF signal indicator will light up accordingly indicating that audio output of the system is in normal operation. 5. AF output level can be adjusted by volume adjustor to match the maximum input level of the equipment to be used. 6. Audio output level must be adjusted to match a proper input level of the mixer or the equipment to be used. If output of the receiver is adjusted too high and volume control of the mixer is turned too low, it will cause...
Otros modelos de este manual:Auriculares y micrófonos - R-1000 (830.54 kb)