Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best practices information, see the Regulatory Compliance Homepage at 5. Disconnect the Bluetooth cable from the Bluetooth. 6. Remove the Bluetooth assembly from the Tablet-PC. Replacing the Internal Card With Bluetooth Wireless Technology 1. Connect the Bluetooth cable to the new Bluetooth assembly. 2. Carefully slide the Bluetooth assembly into the bay. 3. Replace the captive screw on the Bluetooth assembly to secure the Bluetooth assembly in place. 4. Replace the battery. See Replacing the Main Battery. Note: Ensure that the Bluetooth cable does not disconnect from the Bluetooth assembly when sliding it into the bay. Coin-Cell Battery Dell™ Latitude™ XT2 Service Manual Removing the Coin-Cell Battery Replacing the Coin-Cell Battery Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Tablet-PC. 2. Turn the computer over and remove the main battery from the Tablet-PC. 3. Turn the computer over to the top side and remove the hinge cover from the Tablet-PC. 4. To get to the coin-cell battery, remove the keyboard from the Tablet-PC. 5. Disconnect the coin-cell cable from the system board. 6. Gently pry the coin-cell loose from the adhesive that attaches it to the system board and remove from the Tablet-PC. WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best practices information, see the Regulatory Compliance Homepage at Replacing the Coin-Cell Battery 1. Peel the backing from the new coin-cell battery. 2. Connect the coin-cell cable to the system board and press the coin-cell battery into place on the system board. See diagram in step 6 above for placement. 3. Replace the keyboard, attaching it securely with the keyboard screws. 4. Replace the hinge cover. 5. Turn the computer over and replace the battery. See Replacing the Main Battery. Grip Cover Dell™ Latitude™ XT2 Service Manual Removing the Grip Cover Replacing the Grip Cover Removing the Grip Cover 1. Follow the procedures in Before Working Inside Your Tablet-PC. 2. Remove the battery from the Tablet-PC. 3. Remove the two screws from the bottom of the grip cover. WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best practices information, see the Regulatory Compliance Homepage at 4. Slide the grip cover away from the Tablet-PC and remove. Replacing the Grip Cover 1. Slide the new grip cover onto the base of the Tablet-PC. 2. Attach the grip cover with the two grip cover screws. 3. Replace the battery. See Replacing the Main Battery. Hard Drive Dell™ Latitude™ XT2 Service Manual Removing the Hard Drive Replacing the Hard Drive Removing the Hard Drive 1. Follow the procedures in Before Working Inside Your Tablet-PC. 2. Remove the battery from the Tablet-PC. 3. Loosen the four captive screws on the hard drive bracket. WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best practices information, see the Regulatory Compliance Homepage at 4. Remove the hard drive bracket. 5. Slide the hard drive towards the edge of the Tablet-PC to disconnect from the system board. 6. Remove the hard drive from the Tablet-PC. Replacing the Hard Drive 1. Slide the new hard drive into position gently until the connector end fits into the system-board connector. 2. Secure the hard drive into place by replacing the hard drive bracket. Attach the bracket to the Tablet-PC with the four captive screws. 3. Replace the battery. See Replacing the Main Battery. Heat Sink and Fan Assembly Dell™ Latitude™ XT2 Service Manual Removing the Heat Sink and Fan Assembly 1. Follow the procedures in Before Working Inside Your Tablet-PC. 2. Remove the battery from the Tablet-PC. 3. Remove the hard drive from the Tablet-PC. 4. Remove the memory and mini-card cover from the Tablet-PC. 5. Remove the memory from the Tablet-PC. 6. Remove the mini-card from the Tablet-PC. 7. Remove the BIOS chip from the Tablet-PC. 8. Remove the Bluetooth module from the Tablet-PC. 9. Remove the hinge cover from the Tablet-PC. 10. Remove the keyboard from the Tablet-PC. 11. Remove the display assembly from the Tablet-PC. 12. Remove the palm rest from the Tablet-PC. 13. Remove the system board from the Tablet-PC. 14. Disconnect the fan cable from the system board connector, then flip over the system board. 15. Loosen the four captive screws on the heat sink. WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulato...