Bacharach, Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Bacharach, Inc. Copyright © 2003 . 2006, Bacharach, Inc., all rights reserved. BACHARACH® is a registered trademark of Bacharach, Inc. All other trademarks, trade names, service marks and logo

The default value is 100 feet. Note that setting this value to “0” causes the zone to be bypassed during normal operation, and the word “DISABLED” in appear in place of the zone’s PPM reading in the Zone Screen (Page 44). 1. Press the DISTANCE key to adjust the distance value. 2. Use the LEFT/RIGHT cursor keys to move across the entry field and the UP/DOWN cursor keys to modify the setting. 3. Press ENTER to accept the new entry or QUIT to revert to the previous setting. Instruction 3015-4275 Av

IR REMOTE SILENCE Point and click any remote control to silence unwanted alarms. EZ VIEW BACKLIT DIGITAL DISPLAY TWO SILENCE FEATURES Silences low battery chirp for up to eight hours or silence nuisance alarm for several minutes. END OF LIFE TIMER Provides audible and visual notice when alarm needs to be replaced. CAT. GCO1B 120V AC Plug-in with 9V Battery Backup CO & EXPLOSIVE GAS COMBO ALARM First Alert Model GCO1 is a 120V AC plug-in with battery back-up single station carbon monoxide and exp

This steady state combustion analyzer is a room air CO test instrument, flue gas CO tester, dual channel digital thermometer (up to 999°F), digital manometer and is capable of measuring eight different fuels. Phone: 1-800-736-4666 Website: E-mail: help@mybacharach.com Specifications Product Features Five Tools in ONE! • Combustion and efficiency analyzer - (8) different fuels • Room air CO test instrument • Flue gas CO tester (CO air free) • Dual channel digital thermometer • Digital

11/10+) Resawing AWARNING Resawing operations require proper procedures to avoid serious injury. Extra care must be taken to prevent kickback when resawing. Any tilting or movement of the workpiece away from the fence will cause kickback. Be certain that stock is flat and straight. Failure to follow these warnings could result in serious personal injury. Resawing is the process of cutting a thick piece of stock into one or more thinner pieces. Although resawing can be done with a table saw,

Disconnect all sources of power before servicing. Control unit and associated equipment may be damaged by removing and/or inserting cards, modules, or interconnecting cables while the unit is energized. Do not attempt to install, service, or operate this unit until manuals are read and understood. CAUTION - System Re-acceptance Test after Software Changes: To ensure proper system operation, this product must be tested in accordance with NFPA 72 after any programming operation or change in site-s

All other trademarks, trade names, service marks and logos referenced herein belong to their respective companies. A Instruction 24-9448 Contents Contents 1 Introduction..................................1-1 1.1 PCA 2 General Description...............................1-1 1.2 Sales Combo & Model Configurations......................1-2 1.3 Features & Benefits....................................1-4 1.4 Operational Overview...................................1-5 1.5 Connector Descriptions..

TELEPHONE : + 44 (0) 1684 891500 FACS IMILE: + 44 (0) 1684 891600 EMA IL: sa les@ e lectron icdev ice.demon.co.uk WEB S ITE: lectron icdev ice.demon.co.uk IMPORTANT 1. The equipment supplied must not be modified in any way since modifications will invalidate intrinsic safety certification, MCA and Lloyds approval. 2. Care should be taken during servicing as high voltages may be present on the output contacts. 3. It is important to note that the ED810 contains four Zener Barriers, type ZB1, which

Higher ISO indicates greater sensitivity. NOTE: A higher ISO may produce unwanted “noise” in a picture. Exposure Compensation— adjust the exposure. If the picture is too light, decrease the setting; if it’s too dark, increase the setting. Shutter speed— control how long the shutter stays open. Aperture— (also known as f-stop) control the size of the lens opening, which determines the depth of field. ¦Smaller f-stop numbers indicate a larger lens opening; good for portraits and low-light conditio