Votos - 4, Puntuación media: 4.8
(
)
)
|
Fotos y especificaciones Panasonic DP-8045 |
Resumen del manual
• Invalid Machine will not accept a Relay XMT request. •Valid Machine will accept a Relay XMT request. 2 Fax Parameters “143 Relay XMT Report” Selecting how the COMM. Journal for Relayed transmission is sent to the originator. •Off Does not send. •Always The COMM. Journal is always sent after a Relay communication is completed or has failed. •Inc Only The COMM. Journal is sent if the Relay communication to the destination has failed. 3 User Parameters “36 Relay XMT Password” Enter a Relay XMT Password (up to 10 characters) to be used for the protection against unauthorized (outside) stations from accessing your machine to relay messages to a G3 fax machine via PSTN. This password should be given out to authorized people only. ..Program “36 Relay XMT Password” to enable this machine to work as a relay station. As the relay password is transmitted in the header of Email, it should be differentiated from the Email address used by Email or Internet Fax. A relay password pre-programmed in this way would be easy to identify when Internet Fax is received. 4 User Parameters 40 to 49 “Relay Domain (01)” to “Relay Domain (10)” Register up to 10 Domain Names (up to 30 characters) that your machine will accept Relayed transmission. Requests to relay a message to another G3 fax machine via PSTN. Ex: Registered Domain Names (01): panasonic.co.jp (02): abc.iFax.com (03): panasonic.com ..To increase network security by protecting from third party access to the relay station, enter a relay-permitted domain name and an administrator Email address for every relay station. ..If the whole domain name is left blank, Internet Fax will receive Relayed transmission requests from all the domain names. Item Required Function Parameters Explanation 5 User Parameters “37 Manager’s Email Addr” Register the department manager’s Email address for supervising, and cost control purposes. Once registered, the machine will send an Email notification to the Email address for each Relayed XMT Request received from a remote station. The following information is sent. (From: The Email address of the originating station.) (To: The telephone number of the destination G3 fax machine.) ..For more Function Parameters details, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM. Settings for Initial Sending Station To use the machine as an initial sending station, program the following parameters in Function Parameters: Item Required Function Parameters Explanation 1 Fax Parameters “140 LAN RLY XMT Request” Select “Valid” to use this machine as an initial sending station. • Invalid Select to disable Relayed transmission. • Valid Select to enable Relayed transmission. 151 Chapter Internet 152 Chapter 5 Internet Fax 152 Chapter 5 Internet Fax Adding End Receiving Stations for Relayed Transmission You can add end receiving stations to the Address Book by the following procedure. ..If broadcasting to multiple end receiving stations is required, use group dialling (see page 183). ..The Function Parameter “140 LAN RLY XMT Request” (Fax/Email Settings > Fax Parameters) must have been set to “Valid” to have a LAN Relayed transmission request pre-programmed in the Address Book. For more operational details, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM. ..For instructions on registration in the Address Book, refer to Address Book (see page 172). ..You cannot use the address registered for Relayed transmission for Confidential communication, Sub-address communication, and Password transmission. Register an address without a relayed station (see page 173). 1 Press the Function key. 5 Enter a fax number, and then select “OK”. 2 Select “Fax/Email Settings”. 3Select “00 Address Book”. ..Select “Clear” to delete the fax number one digit at a time. ..For instructions on how to enter fax numbers, refer to Manual Dialling (see page 16). 4Select “01 Add Telephone Number”. 6 Enter a station name, and then select 8 Select whether to add a station to “OK”. “Favourites”. ..Enter a station name up to 15 characters. ..For instructions on using the onscreen Keyboard, refer to Before Starting in the Operating Instructions (For Function Parameters) of provided CD-ROM. 7 Enter a Key Name, and then select “OK”. ..Key Names are displayed on the Touch Panel Display to select destinations. ..For instructions on using the onscreen Keyboard, refer to Before Starting in the Operating Instructions (For Function Parameters) of provided CD-ROM. Select to show the station in “Favourites”. Select not to show the station in “Favourites”. 9 Select a relay station or enter the Email address of a relay station, and then select “OK”. ..This screen appears when the Function Parameter “140 LAN RLY XMT Request” (Fax/Email Settings > Fax Parameters) has been set to “Valid”. ..Only one destination can be programmed as a relay station. ..Press the Reset key to return the machine to the initial scr...
Otros modelos de este manual:Impresoras - DP-8020E (4.63 mb)
Impresoras - DP-4530 (4.63 mb)