Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
18. Servicio por personal calificado debera ser provisto cuando: A: El cable de poder o el contacto ha sido danado; u B: Objectos han caido o liquido ha sido derramado dentro del aparato; o C: El aparato ha sido expuesto a la lluvia; o D: El aparato parece no operar normalmente o muestra un cambio en su desempeno; o E: El aparato ha sido tirado o su cubierta ha sido danada. 4 TABLE OF CONTENTS Contents 1. Specifications ..............................................................6 2. Introduction ................................................................8 2.1 Description ..........................................................8 2.2 Features................................................................8 3. Configuration and Installation ................................10 3.1 Configuration Switches ....................................10 3.2 Installation ........................................................14 4. Reading the LED ......................................................15 5. Troubleshooting........................................................16 5 SERIAL-PARALLEL CONVERTERS 1. Specifications Data Rates — 300, 600, 1200, 2400, 4800, 9600, 19,200, 38,400 bps Indicators — LED displays status and operating condition Interface — EIA RS-232 async serial (autosensing DTE/DCE) and IBM PC parallel Connectors — (1) DB25M, (1) DB25F Data Format — 7 or 8 bits; 1 or 2 stop bits; even, odd, or no parity Temperature Range — 32 to 140°F (0 to 60°C) Altitude — Up to 10,100 feet (3078 m) Humidity — 5 to 95%, noncondensing Power — No external power required; uses power from the RS-232 interface 6 CHAPTER 1: Specifications Size — 3.4"H x 1.3"W x 0.8"D (8.7 x 3.3 x 2 cm) Weight — 2 oz. (57 g) 7 SERIAL-PARALLEL CONVERTERS 2. Introduction 2.1 Description The Serial-Parallel Converters automatically convert RS-232 serial data to parallel data format and vice versa, in one direction at a time. Incorporating advanced microprocessor technology, they are able to automatically sense and select parallel and serial modes, as well as DCE/DTE modes. Requiring no AC power, these Converters support serial data rates to 38.4 kbps. For easy configuration, the Converters feature a convenient set of external configuration switches. These accessible configuration switches allow you to control baud rate, parity, word length, and flow control. An easy-to-read LED indicator displays status and operating condition. Housed in an ultra-miniature ABS plastic case, each Converter comes equipped with a DB25 female connector on the serial side and a DB25 male connector on the parallel side. 8 CHAPTER 2: Introduction 2.2 Features • Converts parallel data to serial data and vice versa. • Automatically selects parallel-to-serial and serial-to-parallel operation. • Automatically selects DCE/DTE modes. • Serial data rates to 38,400 bps. • No AC power required. • Supports both software and hardware flow control. • A five-state LED monitors status and diagnostics. • External c...
Otros modelos de este manual:Impresoras - SERIALPARALLEL CONVERTER IV PI125A-R2 (78.14 kb)