Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
The WPS LED blinks in the order below: aThe light blinks fast on the WPS LED. The machine is connecting to the access point (or wireless router). bWhen the machine is successfully connected to the wireless network, the WPS LED light stays on. 2. Using a network-connected machine 109 Wireless network setup Re-connecting to a network When the wireless function is off, the machine automatically tries to re-connect to the access point (or wireless router) with the previously used wireless connection settings and address. In the following cases, the machine automatically re-connects to the wireless network: • The machine is turned off and on again. • The access point (or wireless router) is turned off and on again. Canceling the connection process To cancel the wireless network connection when the machine is connecting to the wireless network, press and release the (Cancel or Stop/Clear) or (Power)button on the control panel. You need to wait 2 minutes to reconnect to the wireless network. Disconnecting from a network To disconnect the wireless network connection, press the (WPS) button on the control panel for more than two seconds. • When the Wi-Fi network is in idle mode: The machine is immediately disconnected from the wireless network and the WPS LED turns off. • When the Wi-Fi network is being used: While the machine waits until the current job is finished, the light blinks fast on the WPS LED. Then, the wireless network connection is automatically disconnected and the WPS LED turns off. Using the menu button Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine Before starting, you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network. 2. Using a network-connected machine 110 Wireless network setup After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 93). Press the (Menu) button on the control panel. 1 Press Network > Wireless > WLAN Settings. 2 Press the OK to select the setup method you want. 3 •Wizard (recommended): In this mode, the setup is automatic. The machine will display a list of available networks from which to choose. After a network is chosen then printer will prompt for the corresponding security key. •Custom: In this mode, users can give or edit manually their own SSID , or choose the security option in detail. Setup using Windows Shortcut to the Wireless Setting program without the CD: If you have installed the printer driver once, you can access the Wireless Setting program without the CD. From the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Wireless Setting Program. Access point via USB cable Items to prepare • Access point • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable Creating the infrastructure network Check whether the USB cable is connected to the machine. 1 Turn on your computer, access point, and machine. 2 Insert the supplied software CD into your CD-ROM drive. 3 Select the Wireless Setting and Installation option. 4 Read the License Agreement, and select I accept the terms of the 5 License Agreement. Then, click Next. The software searches the wireless network. 6 If the software has failed to search the network, check if the USB cable is connected properly between the computer and machine, and follow the instructions in the window. 2. Using a network-connected machine 111 Wireless network setup • If wireless network set up has been set before, the Wireless Network Setting Information window appears. If you want to reset the wireless settings, check the check box and click Next. • For models that support the WPS button (without a USB cable connection), the window shown below will appear. -With a USB Cable: Connect the USB cable and click Next, then go to step 7. -Using the WPS Button: See "Access point via WPS button (without a USB cable connection)" on page 115. Select the method to use from the wireless set up method window. 7 •Configure the wireless settings manually.: Go to step 8. •Configure the wireless settings by pressing the WPS button on the access point.: Connect to the wireless network by press the WPS button on the access point (or wireless router). -Follow the instructions in the window. When you are done configuring the wireless network settings, go to step 11. After searching, the window shows the wireless network devices. Select 8 the name (SSID) of the access point you are using and click Next. 2. Using a network-connected machine 112 Wireless network setup Wireless network setup If you cannot find the network nam...
Otros modelos de este manual:Impresoras - ML-2160 (5.92 mb)
Impresoras - ML-2160/STS (5.92 mb)
Impresoras - ML-2160/XAX (5.92 mb)
Impresoras - ML-2160/XAZ (5.92 mb)