Votos - 4, Puntuación media: 3.8
(
)
)
|
Fotos y especificaciones Canon LV-8225 |
Resumen del manual
1. Unplug the AC Power Cord from the AC outlet. 2. Hold down the OK button on the projector and connect the AC Power Cord into the outlet again. Keep holding down the OK button until the POWER indicator lights. The PIN code returns to the factory default setting while the PIN code lock state will remain the same as the previous set state. Fan This function provides the following options in the cooling fans’ operation when the projector is turned off (p.23). L 1...... Normal operation L 2...... Slower, lower-sound and longish-time than the normal operation (L 1). Fan control Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector. Off................ Normal speed. Set this function to Off when using the projector in non- high altitude environment. On 1............. Faster than Off mode. Select this mode when using the projector in high altitudes (about 1,000 meters to 2,000 meters above the sea level) where the fans have less cooling effect. On 2............. Faster than On 1 mode. Select this mode when using the projector in higher altitudes (about 2,000 meters to 3,000 meters above the sea level) where the fans have lesser cooling effect. .Note: The fan noise becomes louder in On 1 and On 2. Lamp counter reset Video delay control When you want to make a digital processing of a projected image faster, set this function. Use the Point ^Ў buttons, select an item of Off or On. .Note: Noise reduction and Progressive can not be selected when Video delay control function is set to On. Lamp counter Be sure to reset the Lamp replacement counter after the lamp is replaced. (p.68) Press the Point ^Ў buttons to choose the Lamp counter function and then press the Point > or the OK button to access the submenu items. Lamp counter................This item shows the total accumulated time of the lamp usage. Lamp counter reset.......Press the OK button to choose Lamp counter reset. Select Yes in the confirmation box if you want to reset the lamp counter, and then choose Yes in the second confirmation box to reset lamp counter. Filter counter This function is used to set a frequency for the filter cleaning. Use the Point ^Ў buttons to select Filter counter and then press the Point > or the OK button to access the submenu items. Filter counter.........Show the total accumulated time of the filter use timer setting. Timer..................... To set a timer, when the projector reaches the time, the Filter warning icon (Fig.1) appears on the screen and the total accumulated time turns red, indicating that the filter replacement is necessary. Filter counter reset... After replacing the filter, be sure to reset the timer. The Filter warning icon will not turn off until the filter counter is reset. For details about resetting the timer, refer to “Resetting the Filter Counter” on page 66. Filter counter Press the OK button to select Timer, and then use the Point ^Ў buttons to set the timer. Select from (Off/2000H/3000H/4000H) depending on the use environment. Fig.1 Filter warning icon Filter warning icon appears on the screen at a set time (Off/2000H/3000H/4000H). .Note: • This icon also appears at turning on. • The Filter warning icon (Fig.1) will not appear when the Display function is set to Off (p.53), during Freeze (p.28), or Blank (p.29). Factory default Warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order. .Note: When the Factory default function is executed, all the warning log records will be deleted. Factory default This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings. Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Remote control unit Direct Operation Press the INFO. button on the remote control unit to display the Information Menu. Menu Operation INFO. button Press the Point ^Ў buttons to select the Information. The Information Menu is displayed. See below for displayed information. Input The selected input source is displayed. H-sync freq. The horizontal frequency of the input signal is displayed in KHz, or - - - - KHz when no signal. Information Menu V-sync freq. The vertical frequency of the input signal is displayed in Hz, or - - - - Hz when no signal. Numbers of Hz doubles when during Interlace. Aspect The selected Screen size is displayed. Language The selected language is displayed. Lamp status The selected lamp mode is displayed. Lamp counter The cumulative lamp operating time is displayed. Power management mode Off, Standby or Exit, and Timer are displayed. Key lock The selected ...
Otros modelos de este manual:Proyectores - LV-7290 (5.53 mb)
Proyectores - LV-7295 (5.53 mb)
Proyectores - LV-7390 (5.53 mb)