Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
refers to full Hewlett-Packard support.
refers to devices that have been qualified as interoperable in HP-UX environments and supported by Data Protector 6.20. Please see
the HP web page “third party mass storage devices”. Only certain combinations have been tested and added to the ”third party mass
storage devices” matrix, all combinations not listed in the “third party mass storage devices” matrix are supported through “referenced
support” with Data Protector 6.20.
refers to “referenced support”. Some combinations have been qualified as interoperable in HP-UX environments and supported by
Data Protector 6.20. Please see the HP web page “third party mass storage devices”. For all other combinations, “referenced support”
incorporates full Hewlett-Packard support for Data Protector 6.20 only. For any device-related issues, please contact the corresponding
product vendor first.
In addition, consider the following:
For all devices listed in tables below, please check the hardware I/O bus configuration with your device vendor to make sure
your device also supports the I/O bus architecture.
Windows Server 2003 StorPort port driver is supported with Windows Server 2003 SP1 class drivers. Windows Server 2003
tape and robotics class drivers need to be enabled. Microsoft recommends to update STORPORT.SYS in Windows Server 2003
SP1
(http://support.microsoft.com/kb/916048/en-us)
and
to
update
the
tape
class
driver
TAPE.SYS
(http://support.microsoft.com/kb/907418/en-us). Windows Server 2003 with SP1 limits block sizes to 64kB during a tape
transfer. This limitation may affect performance of high performance tape drives that use larger block sizes. Larger record sizes
are recommended with Ultrium tape devices. In Data Protector larger block sizes are possible up to 1024 kB.
Data Protector 6.20 supports mixed media libraries. For further information, see the HP Data Protector online Help.
Tape pool recycle management and a spare pool configuration is not supported when the tape library is populated with
incompatible media from the same media type.
The IBM AIX Media Agent supports drives only; library robotic must be connected to a system that supports a Data Protector
Media Agent with robotics support, that is an HP-UX, Sun Solaris, Linux or a Windows system.
...Otros modelos de este manual:
Software - HP Data Protector v6.20 English SW E-Media (1.52 mb)
Software - HP Data Protector v6.20 French SW E-Media (1.52 mb)
Software - HP Data Protector v6.20 Japanese SW E-Media (1.52 mb)
Software - HP Data Protector v6.20 Simplified Chinese SW E-Media (1.52 mb)