WARNING This product cannot replace responsible adult supervision. CAUTION 2 Consumer Information • For proper setup and use, please read these instructions. • Please keep this instruction sheet for future reference, as it contains important information. • Transmitter operates on AC current (use enclosed AC adaptor). • Receiver operates on AC current (use enclosed AC adaptors) or DC current (three “AAA” LR03 alkaline batteries, not included). • Adult assembly is required. • Tool needed for recei
CAUTION This product cannot replace responsible adult supervision. 2 IMPORTANT! IMPORTANT! Fully charge each receiver (with battery pack inside) for fi ve hours before fi rst-time use. • For proper setup and use, please read these instructions. • Please keep this instruction sheet for future reference, as it contains important information. • Transmitter operates on AC current. Receivers operate on AC current (use enclosed AC adaptor/chargers). or 3.6V NiMH rechargeable battery pack (inside recei
CAUTION This product cannot replace responsible adult supervision. 2 IMPORTANT! • For proper setup and use, please read these instructions. • Please keep this instruction sheet for future reference, as it contains important information. • Transmitter operates on AC current (use enclosed AC adaptor) or DC current (four “AAA” batteries, included). • Receiver operates on AC current (use enclosed AC adaptor) or DC current (three “AAA” LR03 alkaline batteries, not included). Note: A plastic tab is at
• Tool needed for battery installation: Phillips screwdriver (not included). • This product is not intended to be used as a medical monitor and its use should not replace adult supervision. • Test sound reception of receiver(s) before first-time use and whenever you change location of transmitter. • To prevent entanglement: -Never place transmitter in a crib or playpen. Keep transmitter and receiver out of baby’s reach. -Never use extension cords with the AC adaptors. • Never use transmitter or
Transmitter is electrically powered. Remote control receiver is powered by the AC adaptor (included, plugs into standard household outlets 120V AC). Remote control receiver also runs on battery power (9V alkaline battery - not included). Requires one PR12 light bulb (included). An adult must install the battery (if used) and replace the light bulb. Tool needed for battery installation and light bulb replacement: Phillips screwdriver. Soothing Dreams Monitor with Remote Control TM Model Number: 7
If you should need to replace the rechargeable battery, contact Fisher-Price®. • Use the power cord only in a wall outlet. Do not plug the power cord into a ceiling light. • Insert the AC adaptor jack into the receiver and then plug into a wall outlet. Full Charge Half Charged No Charge • Charge the rechargeable battery for 10-1 hours. Do not overcharge your battery. After a first-time charge, you will only need to charge the battery for 8 hours for a full charge. Hint: When using the receiver w
Comprobar la conexion y enchufar bien el cable. No hay corriente en la toma de pared y el transmisor no esta conectado. Comprobar que el interruptor de la luz de la habitacion donde se encuentra enchufado el transmisor esta activado. No hay corriente porque el cortacorriente de la habitacion del bebe esta apagado. Comprobar que los fusibles y los cortacorrientes de la casa estan en la posicion de encendido. Se pueden oir conversaciones y/o sonidos de otras viviendas Pueden producirse interferenc
• Never use transmitter or receiver near water (ie.: bathtub, sink or wet basement, etc.). • Adults Note: Periodically examine the transmitter and the AC adaptor for damage to the cord, housing or other parts that may result in the risk of fire, electric shock or injury. If the transmitter or AC adaptor is damaged, do not use the monitor (if the transmitter is damaged) or the AC adaptor. Use batteries as the power source in the receiver. • Always use transmitter and receiver where there is adequ
Slide transmitter power switch to turn power on. Power indicator lights. Place receiver where you will see or hear it. If you will be using receiver near a wall outlet, we recommend that you use the AC adaptor. Unwrap and fully extend AC adaptor cord for best reception. Plug AC adaptor cord into wall outlet. Rotate receiver power/volume dial to turn power on. Power indicator lights. Rotate power/volume dial to adjust volume. 1 2 3 4 5 6 7 8 If you have any questions about this product: In Canada
The transmitter and receiver also run on battery power. (Transmitter requires four “C” (LR14) alkaline batteries - not included; receiver requires one 9V (6LR61) alkaline battery - not included). Adult assembly is required to install batteries (if used). CONSUMER IMPORTANT! INFORMATION Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us toll-free, rather than return this product to the store. Usually we can solve the problem on the tel