Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
1 or 2 sets of proprietary analog signals Connectors..................................... 1 or 2 shielded RJ-45 female Video input— refer to the TP Transmitters Family User's Manual, part #68-546-02 Video output Number/signal type TP R BNC A........................ 1 analog RGBHV, RGBS, RGsB, component video, or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL composite video from a single source TP R BNC AV..................... 1 analog RGBHV, RGBS, RGsB, component video, or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL/SECAM composite video from a single source and 1 NTSC/PAL/SECAM composite video TP R 15HD A...................... 1 analog RGBHV, RGBS, RGsB, component video, or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL composite video from a single source Connectors TP R BNC A........................ 5 BNC female TP R BNC AV..................... 6 BNC female TP R 15HD A...................... (1) 15-pin HD female Nominal level................................ 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video Minimum/maximum levels........ 0.3 V to 1.45 Vp-p Impedance...................................... 75 ohms Maximum resolution.................... 1600x1200 Refer to the user's manual for the maximum distances recommended for specific resolutions. Audio Number/signal type..................... 1 or 2 sets of analog proprietary signals Connectors..................................... 1 or 2 shielded RJ-45 female Frequency response...................... 20 Hz to 20 kHz, >±0.05 dB THD + Noise.................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at maximum output (unweighted) S/N.................................................. >63 dB at nominal level Crosstalk......................................... <-80 dB @ 1 kHz, fully loaded Stereo channel separation............ >80 dB @ 1 kHz CMRR.............................................. >33 dB @ 20 Hz to 20 kHz Audio input— refer to the TP Transmitters Family User's Manual, part #68-546-02 Umj 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV « 2 dBu Audio output Number/signal type TP R BNC A........................ 1 stereo audio balanced/unbalanced, and 1 stereo audio unbalanced TP R 15HD A...................... 1 stereo audio balanced/unbalanced TP R BNC AV..................... 2 stereo audio balanced/unbalanced, and 2 stereo audio unbalanced NOTE Extron TP Series Receivers • Specifications 1 Specifications — TP Series Receivers, cont'd Connectors TP R 15HD A...................... (1) 3.5 mm, 5-pole captive screw connector per input All other models................ 2 female RCA (left/right) per input (1) 3.5 mm, 5-pole captive screw connector per input Impedance...................................... 50 ohms unbalanced, 100 ohms balanced Gain error....................................... ±0.1 dB channel to channel Maximum level (600 ohm)........... >+11.5 dBm, balanced at 1%THD+N General Recommended cable type............ Enhanced Skew-Free™ A/V UTP Cable or CAT 5/5E/6 (shielded or unshielded) Power TP R BNC AV..................... 100 VAC to 240 VAC, 50/60 Hz, 40 watts, internal External power supply All models except TP R BNC AV 100 VAC to 240 VAC, 50/60 Hz, external; to 15 VDC, 0.8 A, regulated Power input requirements TP R BNC A........................ 15 VDC, 0.3 A (minimum) TP R 15HD A...................... 15 VDC, 0.34 A (maximum) Temperature/humidity................ Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing Cooling........................................... Convection, no vents Mounting Rack mount TP R 15HD A.............. Yes, with optional 1U, 9.5" deep rack shelf, part #60-190-01 (RSU 129) or #60-604-01 (RSB 129); or 1U, 3.5" deep VersaTools® rack shelf, part #60-190-20 (RSF 123) or #60-604-20 (RSB 123); and rack shelf mounting kit, part #70 TP R BNC A, TP R BNC AV Yes, with optional 1U, 9.5" deep rack shelf, part #60-190-01 (RSU 129) or #60-604-01 (RSB 129) Pole mount TP R BNC A, TP R BNC AV Yes, with optional mounting kit, part #70-077-04 (PMK 200) Enclosure type............................... Metal Enclosure dimensions TP R BNC A........................ 1.3" H x 8.75" W x 7.0" D (<1U high, half rack wide) (3.3 cm H x 22.2 cm W x 17.8 cm D) (Depth excludes connectors.) TP R BNC AV..................... 1.7" H x 8.75" W x 7.0" D (1U high, half rack wide) 4.3 cm H x 22.2 cm W x 17.8 cm D (Depth excludes connectors.) TP R 15HD A...................... 1.6" H x 4.25" W x 3.0" D (1U high, quarter rack wide) (4.1 cm H x 10.8 cm W x 7.6 cm D) (Depth excludes connectors.) Product weight TP R BNC A........................ 1.6 lbs (0.7 kg) TP ...