Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
8e6’s script attempts to remove the previous end user’s profile, and then lets the new user log in with his/her assigned profile. echo off :startremove cls NET USE \\10.10.10.10\LOGOFF$ /delete :tryremove1 NET USE \\10.10.10.10\LOGOFF$ if errorlevel 1 goto :tryremove2 if errorlevel 0 echo code 0: Success goto :endremove :tryremove2 NET USE \\10.10.10.10\LOGOFF$ if errorlevel 1 goto :tryremove3 if errorlevel 0 echo code 0: Success goto :endremove :tryremove3 NET USE \\10.10.10.10\LOGOFF$ if errorlevel 1 goto :removalerror if errorlevel 0 echo code 0: Success goto :endremove :removalerror if errorlevel 1 echo code 1: Failed to send removal request! :endremove net use \\10.10.10.10\LOGOFF$ /delete 8E6 TECHNOLOGIES, R3000 ENTERPRISE FILTER AUTHENTICATION USER GUIDE CHAPTER 1: INTRODUCTION AUTHENTICATION OPERATIONS :try1 NET USE \\10.10.10.10\R3000$ if errorlevel 1 goto :try2 if errorlevel 0 echo code 0: Success goto :end :try2 NET USE \\10.10.10.10\R3000$ if errorlevel 1 goto :try3 if errorlevel 0 echo code 0: Success goto :end :try3 NET USE \\10.10.10.10\R3000$ if errorlevel 1 goto :error if errorlevel 0 echo code 0: Success goto :end :error if errorlevel 1 echo code 1: Failed! :end in environments that use both Tier 1 and Tier 2, if a logoff script is used on the network, the Tier 2 Script should be inserted into the network’s logoff script. 8E6 TECHNOLOGIES, R3000 ENTERPRISE FILTER AUTHENTICATION USER GUIDE CHAPTER 1: INTRODUCTION AUTHENTICATION OPERATIONS Tier 3: Session-based, Web Authentication The diagram on the previous page (Fig. 1-6) and steps below describe the operations of the session-based authentication process: 1. The user makes a Web request by entering a URL in his/ her browser window. 2. The R3000 intercepts this request and sends the user the Authentication Request Form, requesting the user to log in with his/her login ID and password. 3. The R3000 verifies the user’s information with the authentication server (Domain Controller, Active Directory, LDAP, etc.). 4. A pop-up window opens on the user’s workstation while the original window loads the requested URL. The user will continue to be authenticated as long as the pop-up window remains open. 8E6 TECHNOLOGIES, R3000 ENTERPRISE FILTER AUTHENTICATION USER GUIDE CHAPTER 1: INTRODUCTION AUTHENTICATION OPERATIONS 8e6 Authenticator The 8e6 Authenticator ensures the end user is authenticated on his/her workstation, via an executable file that launches during the login process. To use this option, the 8e6 Authenticator client (authenticat.exe) should be placed in a network share accessible by the domain controller or a Novell eDirectory server such as NetWare eDirectory server 6.5. NOTE: The 8e6 Authenticator client (authenticat.exe) can be downloaded from the Enable/Disable Authentication window. (See the Enable authentication, specify criteria sub-section in Chapter 2: Network Setup.) Environment requirements Minimum system requirements The following minimum server components are required when using NetWare eDirectory server 6.5: • Server-class PC with a Pentium II or AMD K7 processor • 512 MB of RAM • Super VGA display adapter • DOS partition of at least 200 MB and 200 MB available space • 2 GB of available, unpartitioned disk space outside the DOS partition for volume sys: • One network board • CD drive 8E6 TECHNOLOGIES, R3000 ENTERPRISE FILTER AUTHENTICATION USER GUIDE CHAPTER 1: INTRODUCTION AUTHENTICATION OPERATIONS Recommended system requirements The following server components are recommended for optimal performance when using NetWare eDirectory server 6.5: • Server-class PC with two-way Pentium III, IV, or Xeon 700 MHz or higher processors • 1 GB of RAM • VESA compliant 1.2 or higher display adapter • DOS partition with 1 GB of available space • 4 GB of available, unpartitioned disk space outside the DOS partition for volume sys: • One or more network boards • Bootable CD drive that supports the El Torito specification • USB or PS/2* mouse Workstation requirements The 8e6 Authenticator client works with the following operating systems: • Windows XP Pro SP1 and 2 • Windows 2000 Pro SP4 • Windows XP and Windows 2000 with Novell client v4.91 NOTE: Any non-domain supported Windows operating system, such as ME or XP Home Edition, will not work with the 8e6 Authenticator unless the Novell eDirectory client is installed for login and deployment of the 8e6 Authenticator client using a Novell server. 8E6 TECHNOLOGIES, R3000 ENTERPRISE FILTER AUTHENTICATION USER GUIDE CHAPTER 1: INTRODUCTION AUTHENTICATION OPERATIONS Work flow in a Windows environment 1. The administrator stores the 8e6 Authenticator client (authenticat.exe) in a network-shared location that a login script can access. 2. Using a Windows machine, an end user logs on the domain, or logs on the eDirectory tree via a Novell client. 3. The end user’s login script evokes authenticat.exe. 4. The 8e6 Authenticator client determines the authentication environment by examining the Windows r...
Otros modelos de este manual:Equipo de red - Enterprise Filter Authentication R3000 (5.81 mb)
Equipo de red - Enterprise Filter Authentication R3000 (5.81 mb)
Equipo de red - Enterprise Filter Authentication R3000 (5.81 mb)