EXIT While the setting display is shown, press this button to go back to the previous display. DISPLAY HOLD EXIT HELP DISPLAY HOLD Press this button to turn it on when you wish to maintain the current display. You can keep a display which is normally automatically canceled, for example, or even during a performance, you can monitor information which is not shown on the normal display. DISPLAY HOLD EXIT HELP • The indicator for this button may flash if the current display is one which is normally

(Refer to page 144) 3. Select the desired sound from the list on the display. • When you select a sound, the optimum effects for the sound are automatically applied. You can also choose to cancel this automatic feature. (Refer to page 141.) • You can use the PAGE buttons to view a different part of the list. • The sound you select is memorized for the part you selected in step 1. • The sounds that can be selected for the RIGHT 1, RIGHT 2 and LEFT parts and for PART 1-16 vary. • The illus

(Refer to page 99.) 84 Part IV Sequencer CYCLE RECORD This mode allows you to have specified recording measures continuously repeated. Thus you can record measures by adding notes during any cycle. 1.0n the REALTIME RECORD display, specify “REC” for a track number you are going to record, and “PLAY” fortrack numbers you wish to have played back. 2. Press the CYCLE: OFF button. • The display looks similar to the following. 6. Play the keyboard. • The specified measures are repeated, dur

• If there are SMF files on the disk and you wish to load an SMF file, press the SMF button. (Refer to next page.) 4. Press the LOAD button. • The LOAD operation begins. • When the operation has been successfully completed, “COMPLETED!” is shown on the display. • If song data was loaded, you can press the START/STOP button to begin playback when the SEQUENCER PLAY display is active. • You can load the type of data for which only one song can be recorded in the SEQUENCER. (This type is available

With a real accompaniment as a background, you can concentrate on playing the melody. How the AUTO PLAY CHORD works r Chord Melody & When an AUTO PLAY CHORD mode is selected, an automatic accompaniment which matches the rhythm you have chosen is played in the chord which you specify with your left hand. The melody is played with your right hand. • The accompaniment pattern of the AUTO PLAY CHORD is composed of five parts: DRUMS, BASS, ACCOMP 1, ACCOMP 2 and ACCOMP 3. • The volume

• After this procedure, please do not change the song number. • For details about SEQUENCER operation, refer to page 61. • For information about loading data, refer to page 96. 2. Press the PROGRAM MENUS button to turn it on. 3. Select PIANO PERFORM PADS. 4. Select SEQ TO PAD COPY. • The display looks similar to the following. 5. Select the measures of SEQUENCER data you wish to copy from. • On the SEQUENCER side, use the . and . buttons to make the corresponding settings. FIRST MEAS: The first

malfunction. • Turn off the POWER button once, then turn it on again. If this procedure is not successful, turn off the POWER button once. Then, while pressing the three lower left buttons in the RHYTHM GROUP section (BALLAD POP, TRAD DANCE and MODERN DANCE) at the same time, turn the POWER button on again. (Note that, in this case, all programmable settings, functions and memories return to their factory-preset status.) Cfl U 0) © No sound is produced when the keys are pressed. • The MAIN VOLU

(Refer to page 78.) STEP RECORD: Change to the STEP RECORD mode. (Refer to page 80.) PART CLR: Erase all recorded contents of the currently selected part. NOTE CLR: Data is erased one note or one percussion instrument (DRUMS part) sound at a time. • Hold and press this button, and press the keyboard key that corresponds to the note or percussion instrument (DRUMS part) sound you wish to erase. ALL ERAS: The performance recorded in the selected part is erased for as long as this button is

This is convenient when this instrument is played with other instruments or with a recorded performance. 1. On the SOUND menu display, select MASTER TUNING. • The display changes to the following. 2. Use the a and v buttons to adjust the pitch within a range of 427.3 to 453.0 Hz. • The decimal can be set to 0, 3 or 6. 1.0n the SOUND menu display, select OVERALL TOUCH SENSITIVITY. • The display changes to the following. |SOUND ] BL OUERfiLL TOUCH SENSITIUITV TOUCH SENSE NORMAL MINIMUM

And each time the FILL IN 2 button is pressed, the FILL IN 2 pattern plays, and then the style changes in the 1 -* 2 3 -♦ 4 order. ■ MUSIC STYLE ARRANGER mode You can define which panel settings change by pressing a FILL IN button when the MUSIC STYLE ARRANGER is used. 1. Press and hold the MUSIC STYLE ARRANGER button for a few seconds. • The display changes to the following. T >->n J= iCu MSA MODE SET Sound&Rhy t hm DRUMS ACCOUP1 ACCOUP1 ACC0MP1 BASS LEFT RIGHTS RK3HT1 (continued on