Install the dryer according to the INSTALLATION INSTRUCTIONS. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. 1. CLEAN LINT FILTER before each use. 2. LOAD DRYER. Open dryer door. Shake out laundry and place in dryer. 3. CLOSE DOOR. Dryer will not operate with the door open. A WARNING To reduce the risk of bodily injury, the dryer will stop tumbling when the door is opened. Do not use the dryer if it does not stop tumbling when the door is opened or start tumbling without turning the START me

(If this dryer changes ownership, be sure this manual accompanies the dryer.) -WARNING- FOR YOUR SAFETY If you smell gas: 1. Open windows. 2. Don’t touch electrical switches. 3. Extinguish any open flame. 4. Immediately call your gas supplier. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. 5°r\ö3fVi. To Dry Clothes IMPORTANT: Please read all instructions before using the dryer. Before using dryer for th

NATURAL GAS service must be supplied at 6... ± 1... inch water column pressure (1.62 ± .37 kPa). L.P. GAS service must be supplied at 11 ± .3 inch water column pressure (2.74 ± .07 kPa). If gas service is not same as that specified, DO NOT CONNECT THE GAS LINE TO TUMBLER! It will first be necessary to convert gas burner orifice and gas valve. IMPORTANT: Any product revisions or conversions must be made by the Manufacturer’s Authorized Dealers, Distributors or local service personnel. . WARNING T

7. All manually operated models are factory-equipped with an emergency stop button located on the front panel. If the emergency stop function is desired on coin-operated models, an external emergency stop switch may be installed as specified on the machine wiring diagram. NOTE: Activation of the emergency stop switch stops all machine control circuit functions, but does not remove all electrical power from machine. To reduce the risk of fire, electric shock, serious injury or death to persons wh

Items labeled “Dry With Low Heat” DELICATE DELICATE The suggested timer settings are approximate. Check garment care labels for proper dryer setting. At first, set indicator toward center of drying zone. You may find you will get better results for your loads by setting the indicator to either side. Turn timer knob to a lower setting (clockwise) for less drying, or to a higher setting (counterclockwise) for more drying. IMPORTANT: The heat on DELICATE is not sufficient to remove wrinkles from

(If this tumbler changes ownership, be sure this manual accompanies the tumbler). A copy of the operating instruction must remain with the tumbler after installation. To locate the servicer nearest you, call (414) 748-3121. Part No. M412616 1/95 Manufactured By: Speed Queen Company P.O. Box 990 Ripon, WI 54971-0990 U.S.A. Distributed By: WARNINGS AND LABELS aWARNING FAILURE TO INSTALL, MAINTAIN, AND/OR OPERATE THIS MACHINE ACCORDING TO MANUFACTURER’S INSTRUCTIONS MAY RESULT IN CONDITIONS WHICH C

When all selections have been made, press the MEMORY pad. Your favorite cycle is now saved. This cycle can be stored until you either change the cycle or until there is a power outage of several seconds or longer. To recall your memory cycle, press a SELECT cycle pad twice. The light on the MEMORY pad will light up when the memory cycle is recalled. 8 To change a memory cycle, press an ON/SELECT cycle pad twice to recall the memory cycle. Change the cycle, then press the MEMORY SAVE pad. The

REGULAR, PERM PRESS, DELICATES, KNITS, or NO HEAT. These are automatic, preprogrammed cycles. A light to the left of the pad lights up to show you that pad has been activated. To Dry Clothes IMPORTANT: Please read instructions before using dryer. Before using dryer for the first time, wash out the inside of the dryer cylinder with a sudsy cloth, then wipe dry. Install the dryer according to the INSTALLATION INSTRUCTIONS. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. 1. CLEAN LINT FILTER befor

• •••••One steam pressure relief valve rated at 125 psig. (8.79 kg/cm2). Construction must not block airflow at top rear of tumbler. Doing so would prevent adequate air supply to tumbler’s combustion chamber. VENTING For maximum efficiency and minimum lint accumulation, tumbler air must be exhausted to outdoors by shortest possible route. M412616 31 Proper sized exhaust ducts are essential for proper operation. All elbows should be sweep type. Do not install elbows with a radius less than shown