Votos - 3, Puntuación media: 5
(
)
)
|
Resumen del manual
xx It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur. Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver ..In Ext. mode, DTV Out supports MPEG SD Video and Audio only. ..To obtain the best picture quality, the Component connection is recommended over the A/V connection. PR PB Y COMPONENT OUT AUDIO OUT VIDEO OUT R-AUDIO-L AUDIO OUT R-AUDIO-L EXT Y W R W R R G B Y W R W R G B R R B G R W R W Y VCR / DVD DVD / VCR Blu-Ray player Red White Red Blue Green Red White Yellow HDMI OUT DVI OUT AUDIO OUT R-AUDIO-L W R R W DVD / Blu-ray player DVD / Blu-ray player Red White Connecting to an Audio Device Connecting to an Audio Device Using an Optical (Digital) or Headphone Cable Connection Available devices: digital audio system, amplifier, DVD home theatre .DIGITALAUDIOOUT(OPTICAL) xWhen a Digital Audio System is connected to the DIGITALAUDIOOUT(OPTICAL)jack, decrease the volume of both the TV and the system. x5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. xWhen the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. .HeadphonesH: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. xSound function may be restricted when connecting headphones to the TV. xHeadphone volume and TV volume are adjusted separately. OPTICALdigital audio system 02 Connections English 9 Connections CONNECTIONS COMMON INTERFACE Slot To watch paid channels, the “CI or CI+ CARD” must be inserted. If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”. The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. . NOTE • You must obtain a “CI or CI+ CARD” from a local cable service provider. • When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. • Insert the “CI or CI+ CARD” in the direction marked on the card. • The location of the COMMONINTERFACEslot may be different depending on the model. • “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. • If you have any problems, please contact a service provider. • Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen. Changing the Input Source Edit Name ¦ VCR/DVD/Cable STB/Satellite STB/PVR STB/ Source List AVReceiver/Game/Camcorder/PC/DVIPC/ DVI Devices/TV/IPTV/Blu-ray/HD DVD/DMA: Use to select TV or an external input SOURCE Name the device connected to the input jacks to makesources such as a DVD / Blu-ray player / your input source selection easier. cable box / STB satellite receiver. . When a PC with a resolution of 1920 x 1080 @ ¦ TV/Ext./PC/AV/Component 60Hz is connected to the HDMIIN1(DVI) port, /HDMI1/DVI/HDMI2/HDMI3/ you should set to DVIPC mode under EditName. HDMI4/USB . When connecting an HDMI/DVI cable to the . In the SourceList, connected HDMIIN1(DVI) port, you should set to DVIPC or inputs will be highlighted. DVIDevices mode under EditName. . Ext. and PCalways stay activated. 10 English Basic Features How to Navigate Menus Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions. TOOLSINFOMEDIA.PGUIDE3421MENURETURNEXIT 1 ENTERE / Direction button: Move the cursor and select an item. Confirm the setting. 2 RETURN button: Returns to the previous menu. 3 MENU button: Displays the main on-screen menu. 4 EXIT button: Exits the on-screen menu. How to Operate the OSD (On Screen Display) The access step may differ depending on the selected menu. The main menu options appear on the screen: Picture, Sound, Channel, Setup, Input, Application, Support. Select an icon with the ^ or Ў button. Press ENTERE to access the sub-menu. Select the desired submenu with the ^ or Ў button. Adjust the value of an item with the < or > button. The ...
Otros modelos de este manual:TV - UE32C6000RW (19.92 mb)
TV - UE37C6000RW (19.92 mb)
TV - UE40C6000RW (19.92 mb)
TV - UE46C6000RW (19.92 mb)