High blood pressure is a health risk and must be treated without fail. Blood Pressure Indicator (mmHg) 90 85 80 120 130 140 (mmHg) Orange LED Colors Yellow Green Hypertensive (Low / Moderate / Severe) Diastolic Normal High Normal Optimal P/min. 140 130 90 85 M1 M2 Systolic Please consult your doctor without delay if the blood pressure indicator repeatedly draws attention to elevated blood pressure values. Inserting/replacing batteries 1. Slide off the Battery Cover from the housing. 2. Insert fo

The measured value obtained is different from that measured at the upper arm. • For persons with certain circulation problems, there may be substantial differences in blood pressure values measured at the upper arm versus at the wrist. If the device still appears to provide unusual or erroneous readings, consult your physician. If the device does not appear to be functioning properly, contact Panasonic at 1-800-338-0552. 17 18 Specifications Method of measurement: Oscillometric System Display: D

For reference purposes, systolic pressure readings of less than 90 mmHg are considered to indicate low blood pressure regardless of the diastolic pressure. La OMS no define un área de baja presión arterial. A modo de referencia, las indicaciones de presión sistólica inferiores a 90 mmHg son las consideradas para indicar presiones arteriales bajas independientemente de la presión diastólicu. • Do not be alarmed by temporarily high or low readings because fluctuations in a person’s blood pressur

In this case, turn the unit off, wait at least 5 minutes and measure again. Fig. 7 Figura 7 Panasonic» Fig. 8 Figura H in 888 DU. 888 P/Mi inn iOli 17 Si aparece una "E" (significa enor) en la pantalla (figura 10) durante la medida se habrá producido un error, por ejemplo, usted habrá movido la mano durante la medida. En esle caso, apague la unidad, espere un mínimo de 5 minutos y mida de nuevo. 3. To switch the unit off press the Start (On/Off) button. Para apagar la unidad presion

Blood pressure measurements should only be interpreted by a health professional who is familiar with your medical history. No confunda autocomprobación con autod i agnóstico. Las medidas de la presión arterial sólo deberán ser interpretadas por un profesional de la salud que conozca su historial médico. 2. If you are taking medication, consult with your physician to determine the most appropriate time to measure your blood pressure. NEVER change a prescribed medication without first consulting

Para obtener unos resultados más consistentes y precisos, este aparato emplea un sistema de medida Precise Logic™ que verifica la intensidad y la forma de la onda de pulso para medir fiablemente la presión arterial. By using the Precise Logic™ measurement system, measurement reliability and accuracy have been improved. Utilizando el sistema de medida Precise Logic™, la fiabilidad y la precisión de la medida han sido mejoradas. Panasonic Technology Double Check Measurement System Old Technol

1. Press the Memory/Recall button. • The average readings of all recorded measurements are displayed. • The mark will be displayed (Fig. 10-a). • When, for example, readings from 21 measurements (After approx. have been saved the average of the readings from 21 one second.) measurements will be displayed. Fig. 10-b 2. Press the Memory/Recall button to display readings starting with from the most recent measurement. • Each time the Memory/Recall button is pressed readings are displayed in order o

Positioning the Pressure Cuff CAUTIONS: • Do not use the unit for any purpose other than measuring blood pressure. Also, do not use the unit in conjunction with other devices. Improper use may cause a malfunction or personal injury. • Keep the unit out of the reach of children. Fig. 5-a 1. Remove your watch and any jewelry from First wrinkle line of your left hand. 2. Wrapping the cuff around the wrist and securing with hook-and-loop fastener. Leave main unit at the distance of 2 cm (3/4") from

4-a). Adjust the month. Press the Adjust button v?; to adjust the number of the month (Fig. 4-b). Adjust the day. (1) Press the Set button 'f; and the number for the day will flash (Fig. 4-c). (2) Press the Adjust button ■,?; to adjust the number of the day. Adjust the hour. (1) Press the Set button (i> and the number for the hour will flash (Fig. 4-d). (2) Press the Adjust button ¡2; to adjust the number of the hour. Adjust the minutes. (1) Press the Set button (1> and the number for

2. Press the Memory/Recall button. • The average readings of all recorded measurements are displayed. • When readings from 90 measurements have been saved the average of the readings from all 90 measurements will be displayed. (If there is only 1 measurement recorded, mark will not be displayed.) • The mark will be displayed. • Blood pressure indicator will be lit up for approximately 6 seconds. 3. Press the Memory/Recall button to display readings starting with from the most recent measurement.