Iniciar sesión:
Votos - 5, Puntuación media: 3.6 ( )

Manual de usuario Dymo, modelo 9000

Fabricar: Dymo
Tamaño del archivo: 203.23 kb
Nombre del archivo: 9000.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


The Labelmaker uses 6mm (1/4"), 12mm (1/2"), 19mm (3/4") 24mm (1") or 32mm (11/4") wide tape cassettes in a number of label colours. Labels can be tab-cut for easy removal from the backing tape. Text can be printed horizontally or in a variety of sizes and styles and can be left-justified, right-justified or centred on the label. Warranty Registration Please complete the warranty registration card and return it to your national customer service address within seven days – see the warranty booklet for details. Power Supply AC ADAPTOR • Connect the AC adaptor to socket AE . Use only the special AC adaptor designed for the DYMO 9000 Labelmaker. • An internal battery will retain memory settings for up to three months. The battery is charged while the Labelmaker is connected to the AC adaptor. Changing the cassette • Ensure that tape and ribbon are taut across mouths of cassettes (wind the ink ribbon cassette on a little if necessary before inserting cassette). • Insert tape cassette BE as shown. • Insert correct ink ribbon cassette BE as shown. Note – interlocks CE prevent you from inserting a 19mm (3/4") ink ribbon cassette with a 24mm (1") or 32mm (11/4") tape cassette. • Insert cassettes with tape and ribbon positioned as shown between pinch roller CE and print head CI . • Ensure tape and ribbon are positioned correctly. • Ensure that the lid is closed correctly or printing will not start. • A sensor detects if a label is left in the cutter area. When this occurs further printing will be prevented until you remove the label. See ‘Troubleshooting’. • When you change to another cassette size, the Labelmaker will prompt you to select the correct tape width installed – see CASSETTE in the SET UP function menu. vertically The Display The display shows: UK • A ‘WYSIWYG’ representation of the label you are creating in edit mode and menus for selecting functions and features. • A status bar at the bottom of the display. WYSIWYG DISPLAY STATUS BAR Function keys ON/OFF Switches the power on and off. • Switches off automatically after ten minutes if no keys are pressed. The last label created will be retained and displayed when next turned on. In addition, any stored settings will be retained. Note: The internal battery will retain stored settings for up to three months. CAPS CAPITALS • Press for all subsequent characters to be in UPPER CASE (CAPITALS), as confirmed by the CAPS indicator in the status bar. • Press again to cancel and return to lower case. SHIFT KEY • Press and hold down before pressing an alphabet key to produce an UPPER CASE (CAPS) character. • For dual purpose keys, press and hold first to produce the legend above the key. • Pressing while CAPS is set will give lower case characters. DEL DELETE • Press to delete the character to the left of the cursor, or to exit certain function key operations. CLEAR CLEAR TEXT + DEL • Press to clear all the current text but leave the text size and other settings unchanged. Also use to exit or clear certain function key operations. ESC ESCAPE • Press to exit certain function key operations. NEW NEW + ESC • Press to clear the workspace and return all settings back to their default state - eg plain text, auto size, etc. CURSOR KEYS , , or • Press or to move the cursor along the text, one character at a time. • Press and hold to scan quickly through the text. 3 • Press + or to move the cursor to the beginning or end of the line of text. • When used in conjunction with certain function keys, use or to select options. • To insert characters into the text, use or to position the cursor under the character to the right of the insertion point, then type in the characters required. • Press or to move the cursor to the start of the previous or next line of a multi-line label. • Press + or to move the cursor to the beginning or end of the label. PRINT • Press to print the label. PRINT PRINT • Use the CUTTER option in the menu to select CUT ONLY or CUT TAB – see ‘SET UP’. SET UP SPACE KEY • Press to insert a space into the text. FEED + FEED + FEED • Press to feed out 25mm (1") of tape and cut the tape with a tab cut. PAGE + • In edit mode, press + to start a new ‘page’ of the label. SELECT • In edit mode, press followed by or to highlight characters. • Use a function key to change the format of the highlighted characters, eg BOLD, then press to make the change and return to edit mode. • Press again to remove the highlight. • Note that global functions, eg BOX, will always apply to the whole label. International characters To add a diacritical (accent) to a character, enter the character first, followed immediately by the diacritical, e.g. press E followed by ' to get e. SIZE AUTO WIDTH W FONT HELV A AUTO 1 2 3 4 5 6 The display shows the current selection of text size, width and font. Use or to step through the menu options SIZE, WIDTH or FONT. Each option will flash when it is selected. The status bar will change to show the choices available for that function, ie for SIZE, sh...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría