Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Document Outline
- Contents
- HP Technical Support
- Configuration Information
- Configuration Best Practices
- Install HP Clustered File System
- Supported Operating Systems
- Contents of the Clustered File System Distribution
- Initial Pre-Planning Steps
- Installation IProcedure
- Installation Checklist
- 1. Install a Supported Operating System and Kernel
- 2. Configure the Storage Array
- 3. Install Third-Party MPIO Software (Optional)
- 4. Configure MPIO
- 5. Configure FC Switches for the Cluster
- 6. Create LUNs or Disk Partitions for Membership Partitions
- 7. Install HP Clustered File System
- 8. Install the Quota Tools RPM (Optional)
- 9. Specify an HBA Driver If Necessary
- 10. Verify the SAN Configuration
- 11. Run the mxcheck Utility
- 12. Set Clustered File System Parameter for FalconStor
- 13. Configure the Cluster from the Management Console
- 14. Configure HP CFS for Public versus Private Network
- Test the Fencing Configuration
- Install the Management Console on Other Hosts
- Install FS Option
- Install the SLES9 Operating System and Kernel
- Configure the Cluster from the Command Line
- Run mxconfig
- Clustered File System License File
- Specify the Cluster Password
- Specify the Network Authentication Secret Password
- Select the Cluster Administrative Traffic Protocol
- Select a Fencing Method
- Configure FibreChannel Switches
- Set the SNMP Community String
- Modify Disk Partitioning for Membership Partitions
- Create Membership Partitions
- Add a Snapshot Configuration
- Export the Configuration
- Verify the Fencing Configuration
- Complete the Installation
- Run mxconfig
- HBA Driver Procedures
- Index