Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
5697-2006 RDX DL Storage Module Flyer back.pdf 1 27/06/2012 12:11
7. If you wish to use the optical drive, remove the blank from the HP RDX DL Server Module and
insert the CD or DVD drive that you removed in step 2. Reconnect the SATA cable to the rear of
the optical drive.
8. Push the HP RDX DL Server Module
fully into the bay and secure it
using the screws that you removed
in step 3.
1 Install HP RDX DL Server Module
2 Secure with screws
9. Replace the server covers and power cable, power up the server, as instructed in the HP ProLiant
Server User Guide. Refer to the HP RDX Backup System User Guide for operating and
troubleshooting information.
Returning the unit
IMPORTANT: Do not return the complete HP RDX DL Server Module.
Follow the troubleshooting processes in the appropriate optical drive or RDX user guide. If
there is an issue that requires replacement, follow the instructions below.
If there is a problem with the optical drive, remove it and return for servicing.
If there is a problem with the RDX
Removable Disk Backup System, detach the
cables, remove the four screws that secure
the RDX unit to the module and keep them
safe for use with the replacement module.
Remove the RDX unit from the module and
return it for servicing. It is important to
retain the cables; the replacement unit
does not include cables.
Return details are different for the two
units; details can be found on the base of
the units after you remove them.
© 2012 by Hewlet -Packard
Development Company, L.P.
5697-2006