Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
(Sticky Note comment Note 01.07.1999 23:11:17 Click on any Beckett logo to go to the Table of Contents page. Click on an item in the Table of Contents and go to that page of the manual.) Thank youfor purchasing a Beckett burner. With proper care and regular maintenance, it will provide years of trouble-free service. Please take a few minutes to read the section entitled “To the owner” inside this manual. Then, keep the manual in a safe place where it can be easily located if needed by your professional service technician. 2500/ Instruction Manual – Model CF2500/CF3500 Oil Burner Please . . . read this page first Hazard definitions The following will be used throughout this manual to bring attention to hazards and their risk factors, or to special information. Denotes presence of a hazard which, if ignored, will result in severe personal injury, death or substantial property damage. Denotes presence of a hazard which, if ignored, could result in minor personal injury or property damage. Denotes presence of a hazard which, if ignored, could result in severe personal injury, death or substantial property damage. Intended to bring special attention to information, but not related to personal injury or property damage. To the owner — Installation and adjustment of the burner requires technical knowledge and the use of combustion test instruments. Do not tamper with the unit or controls. Call your qualified service technician. Incorrect operation of the burner could result in severe personal injury, death or substantial property damage. Have your equipment inspected and adjusted at least annually by your qualified service technician to assure continued proper operation. Never attempt to use gasoline in your heating appliance or to store gasoline or combustible materials near the heating equipment. This could result in an explosion or fire, causing severe personal injury, death or substantial property damage. To the installer — Read all instructions before proceeding. Follow all instructions completely. Failure to follow these instructions could result in equipment malfunction, causing severe personal injury, death or substantial property damage. This equipment must be installed, adjusted and started only by a qualified service technician – an individual or agency, licensed and experienced with all codes and ordinances, who is responsible for the installation and adjustment of the equipment. The installation must comply with all local codes and ordinances and with the National Fire Protection Standard for Oil-Burning Equipment, NFPA 31 (or CSA B139-M91). To the owner — Never burn garbage or refuse in your heating appliance or try to light the burner by tossing burning material into the appliance. This could result in severe personal injury, death or substantial property damage. Never attempt to use crankcase or waste oil in your heating appliance. This could damage the fuel unit or heating equipment, resulting in risk of severe personal injury, death or substantial property damage. Never restrict air openings on the burner or to the room in which the appliance is located. This could result in fire hazard or flue gas leakage, causing severe personal injury, death or substantial property damage. To the installer — Concealed damage - If you discover damage to the burner or controls during unpacking, notify the carrier at once and file the appropriate claim. Contacting Beckett for service information or parts - Please record the burner serial number (and have available when calling or writing). You will find the serial number on the Underwriters Laboratories label, located on the left rear of the burner. 50 Hz motors — The burner ratings, air settings and nozzle ratings are based on standard 60 hz motors (at 3450 rpm). Derate all ratings 20% when using 50 hz motors. Consult factory for specific application data. High altitude installations — Accepted industry practice requires no derate of burner capacity up to 2,000 feet above sea level. For altitudes higher than 2,000 feet, derate burner capacity 4% for each 1000 feet above sea level. Form 6104 BCF-35-R0699 Instruction Manual – Model CF2500/CF3500 Oil Burner Warranty Beckett warrants its equipment to those who have purchased it for resale, including your dealer. If you have any problems with your equipment or its installation, you should contact your dealer for assistance. Specifications Fuels #1 or #2 Fuel Oil Firing range CF2500A 17.0 - 19.9 GPH CF2500 17.0 - 25.0 GPH CF3500A 17.0 - 35.0 GPH Motor 2 HP 3450 RPM 208/230/60 hz/1-PH std. 13.4 amps @ 230 VAC Optional voltages: (60 hz or 50 hz) – • 208/230/480/3-PH Ignition Trans. 120V/12,000V Housing Cast aluminum Fuel unit 100 - 300 PSIG Oil nozzle 45° - 70° solid Shipping wt. 106 lbs. Dimensions See Figure 7 (Page 7) (See NOTICE on opposite page for 50 hz motor applications.) Agency approvals • Underwriters Laboratories has certified this burner to comply with ANSI Standard 296 and has listed it for use with No. 1 o...