Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
horizontal coverage 120° 220 W continuous program power capacity 75 mm (3 in) aluminium voice coil Composite Polyimide/Titanium diaphragm 500 - 17000 Hz response 108 d B sensitivity * f—' r h i iW / / / / / Horns Specifications Horizontal Coverage 120° max Active Radiating Factor 93.7 % Recommended Crossover (1) 0.8 kHz Waveguide Material Cast Aluminium Nominal Impedance 8 ohm Minimum Impedance 8.6 ohm Nominal Power Handling (2) 110 W Continuous Power Handling (3) 220 W Sensitivity (1W/1 m) (4) 108 dB Frequency Range (5) 0.5 -17 kHz Voice Coil Diameter 75 mm (3 in) Winding Material Aluminium Diaphragm Material Composite Polyimide/Titanium Flux Density 1.85 T Mounting and Shipping Info Waveguide Baffle Cutout 153x25 mm (6x1 in) Driver diameter 124 mm (4.9 in) Dimensions 163x130x235 mm (6.4x5.1x9.3 in) Net Weight 3.3 kg (7.3 lb) Shipping Weight 3.4 kg (7.5 lb) Shipping Box 245x140x175 mm (9.6x5.5x6.9 in) -| 12 dB/oct. or higher slope high-pass filter. 2 2 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. ^Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. ^Waveguide mounted on 90°x10° bell horn © Horizontal angle Frequency (kHz) Frequency (kHz)...