Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
4 Choosing speaker cord..............................................................4 Preparing speaker cord..............................................................5 Connecting speaker cord to the speakers ................ 5 Connecting speaker cord to your receiver or amplifier....... 5 Testing speaker connections .......................... 6 Mounting your speakers on a wall....................... 6 Reference........................................................................................7 Cleaning your speakers............................... 7 Troubleshooting..................................... 7 Technical information ................................ 7 Thank you for purchasing Bose 161 speakers. Their advanced design and quality construction are intended to provide long-term listening enjoyment in your home. Your 161 speakers are engineered to provide quality Bose speaker performance from a simple, elegant design. Unique Bose technol- 3 distributed or otherwise used without prior written permission. ©2001 Bose Corporation. No part of this work may be reproduced, modified, Before you begin Thank you for purchasing Bose 161 speakers. Their advanced design an( quality construction are intended to provide long-term listening enjoymen in your home. Your 161 speakers are engineered to provide quality Bose speaker performance from a simple, elegant design. Unique Bose techno ogies, including Stereo Everywhere®, deliver performance usually associated with much larger speakers. For your records Serial numbers are located on the label on the back of each 161 speaker. Serial numbers:_and_ Dealer name:_ Dealer phone:_Purchase date:_ We suggest you keep your sales receipt with this owner's guide. Setup Unpacking Unpack the carton carefully. Save the carton and packing materials for possible later use. If either speaker appears damaged, do not operate either one. Repack both speakers in the original carton and notify your authorized Bose® dealer immediately. Placing your Bose 161™ speakers Note: Your 161 speakers are magnetically shielded to prevent interference with most television screens. For best acoustic performance, place the left channel speaker on the left side of the room and the right channel speaker on the right, at least 5 feet (1.5 m) apart. (Refer to the label on the back of each speaker.) Make sure the back of each speaker is parallel to the front wall. For rear channel use in a home theater surround sound system, put the speakers near the back of the room, behind or to the sides of the listening area. Attach the supplied self-adhesive feet to the bottom surface of each speaker for greater stability (Figure 1). If you want to mount your speakers using the supplied wall brackets, see "Mounting your speakers on a wall" on page 6. Figure 1 Locations for attaching rubber feet to the bottom of the speakers I I I A CAUTION: Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Choosing speaker cord Be sure to use the proper gauge (thickness) of speaker cord. Standard zip cord (2-conductor, 18-gauge [0.75 mm2] wire found at electrical and hardware stores) works for most applications. If the length of speaker wire extends more than 30 feet (9 m) from a receiver or amplifier, refer to "Wire recommendations" on page 7 or contact your authorized Bose dealer for more information. A CAUTION: Before making any connections, turn off your receiver or amplifier and unplug it from the outlet (the AC power mains). 4 Setup Preparing speaker cord Speaker cord consists of two insulated wires. The insulation around one wire is striped, collared, or ribbed. This marked wire is always positive (+). The plain wire is always negative (-). These correspond to the positive (red) and negative (black) terminals on the back of each speaker, receiver, or amplifier. Be sure to connect each wire to the proper terminal (+ to +, - to -). Note: Be sure to cut enough cord to reach from the receiver to each speaker. At the ends of each cord, strip approximately 12 inch (1.3^cm) of insulation from both wires. Twist the bare ends of each wire so there are no loose strands. Connecting speaker cord to the speakers Locate the terminals on the back of each speaker. Depress the red terminal button (Figure 2), insert the marked (+) wire and release the button. Depress the black terminal button, insert the plain (-) wire and release the button. Connecting speaker cord to your receiver or amplifier Connect the left speaker cord to the left channel speaker output of your receiver or amplifier. Attach the marked wire to the red (+) terminal and the plain wire to the black (-) terminal. In the same manner, connect the right speaker cord to the right channel speaker output. A CAUTION: Make sure no loose strands of wire touch across terminals. This could create a short circuit that can damage an amplifier or...