Votos - , Puntuación media:
(
)
)
Fabricar: Philips
Tamaño del archivo: 155.74 kb
Nombre del archivo: dc315_93_dfu_eng.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
might be displayed. However, all the iPhone functions still work. Remove the iPod/iPhone 1 Pull the iPod/iPhone out of the dock. Listen to the iPod/iPhone 1 Ensure that the iPod/iPhone is loaded correctly. 2 Press SOURCE repeatedly to select iPod/iPhone source. » The connected iPod/iPhone plays automatically. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold / , then release to resume normal play. Charge the iPod/iPhone When the unit is connected to power, the docked iPod/iPhone begins to charge. Play from an external device You can also listen to an external audio device through this unit. 1 Press SOURCE repeatedly to select MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3 LINK jack (3.5mm) on the back of the unit. • the headphone jack on an external device. 3 Start to play the device (see the device user manual). Listen to radio Note • Only FM radio reception is available on this unit. Tune to a radio station Tip • Position the antenna as far as possible from TV, VCR or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. 1 Press SOURCE repeatedly to select FM tuner. 2 Press and hold TUNING +/- for more than 2 seconds. » [Srch] (search) is displayed. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press TUNING +/repeatedly until you find optimal reception. Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold TIME SET/AUTO SCAN for more than 2 seconds to activate automatic program mode. » [AUTO] (auto) is displayed and begins to blink. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. Program radio stations manually You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. 2 Press TIME SET/AUTO SCAN to activate the program mode. 3 Press PRESET +/- to select a number. 4 Press TIME SET/AUTO SCAN to confirm. » The preset number and the frequency of the preset station are displayed. 5 Repeat the above steps to program other stations. Note • To overwrite a programmed station, store another station in its place. Select a preset radio station 1 Press PRESET +/- to select a preset number. 6 Other features Set the alarm timer You can set two alarms which go off at different time. 1 Ensure that you have set the clock correctly. 2 Press and hold ALM 1 or ALM 2 for 2 seconds. » or and hour digits begin to blink. 3 Press TUNING +/- repeatedly to set the hour. 4 Press ALM 1 or ALM 2 to confirm. » or and minute digits begin to blink. 5 Repeat steps 3-4 to set the minute. 6 Repeat steps 3-4 to select whether to ring alarm on weekdays or at weekend. 7 Repeat steps 3-4 to select an alarm sound source. 8 Repeat steps 3-4 to set the alarm volume. Activate and deactivate the alarm timer 1 Press ALM 1 or ALM 2 repeatedly to activate or deactivate the timer. »If the timer is activated, or is displayed. »If the timer is deactivated, or disappears. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL. » The alarm repeats ringing minutes later. Tip • You can press TUNING+/- to adjust interval to repeat alarm. Stop alarm ring 1 When the alarm rings, press the corresponding ALM 1 or ALM 2. » The alarm stops but the alarm settings remain. View the alarm settings Press ALM 1 or ALM 2. Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 Press SLEEP repeatedly to select a set period of time (in minutes). » When the sleep timer is activated, the display shows . Tip • When sleep mode is activated, output volume decreases gradually. To deactivate sleep timer1 Press SLEEP repeatedly until [SLP OFF] (SLP off) is displayed. »When the sleep timer is deactivated, disappears on the display. Adjust display brightness 1 Press BRIGHTNESS CONTROL repeatedly to select different levels of display brightness. Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2X4 W RMS Frequency Response 125 Hz - 16 kHz, ..3 dB Signal to Noise Ratio >55 dB MP3 link 500mV RMS 10 kohm Tuner FM Tuning Range 87.5 - 108 MHz Tuning grid 50 KHz Sensitivity<22 dBu - Mono, 26dB S/N Ratio<45 dBu - Stereo, 46dB S/N Ratio Search Selectivity <28 dBu Total Harmonic Distortion <3% Signal to Noise Ratio >45 dB General information AC power (power adaptor) Input: 100-240 V~, 50/60 Hz, 1.0 A; Output: 9.0 V 2.78 A; Brand name: Philips; Model No.: AS250090- AQ278) Operation Power 15 W Consumption Standby Power Consumption <1 W Dimensions 173 x185 x 144 mm - Main Unit (W x H x D) Weight - Main Unit 0.66 kg Troubleshooting Warning • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself...