Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
3. Open the CD DOOR by pressing the CD DOOR where OPEN/CLOSE is shown. 4. Carefully place an audio CD with its label side upward in the CD compartment and close the CD Door. 5. The LCD Display will briefly display flashing “- -” and then the total number of tracks on the CD will appear in the LCD Display after a few seconds. 6. Press the PLAY/PAUSE Button to start playback. The Play Indicator “>” will light and the CD will start playing from the first track. 7. Adjust the VOLUME CONTROL to obtain the desired sound level from the Built-in Speakers. TO INTERRUPT PLAYBACK 8. To suspend playing, press the PLAY/PAUSE Button once. The Play Indicator will flash. 9. To resume playing, press the PLAY/PAUSE Button again. The Play Indicator “>” will light steadily in the LCD Display. play/ pause play/ pause 8 SKIPPING AND SEARCHING TRACKS 10. You can choose to play your favorite track directly by pressing either the B-SKIP or F-SKIP Buttons. The LCD Display will indicate the track number of the selected track. 11. To locate a particular passage within a track, keep the B-SKIP F-SKIP Buttons depressed until it is found. REPEATING PLAYBACK 12. To repeat a particular track, press the PLAY MODE Button once. The REPEAT Indicator appears in the LCD Display. 13. To repeat the entire CD, press the PLAY MODE Button twice. The REPEAT ALL Indicator lights in the LCD Display. 14. To cancel the REPEAT function, press the PLAY MODE Button two more times until the REPEAT / REPEAT ALL Indicator disappears from the LCD Display. RANDOM PLAYBACK 15. To play the tracks in random, in Stop mode press the PLAY MODE Button three times. The Random Indicator “ ” will appear in the Display. 16. Press the PLAY/PAUSE Button once. A track is picked at random and playback starts. 17. To cancel the random function, press the PLAY MODE Button again. 18. To stop playback, press the STOP Button once. 19. When you wish to turn the System off, press the POWER / STANDBY Button. The LCD backlight goes off. CD PROGRAMMED PLAY This function allows the tracks to be played in a programmed sequence. NOTE: Program can only be set in STOP mode. Up to 20 tracks can be programmed. 1. In CD stop mode, press the PROGRAM Button once. “PROGRAM” will appear and Program No. “P01” will appear briefly and then change to “00” and blink together with “PROGRAM” in the LCD Display to prompt for input. b - skip f - skip REPEAT REPEATALL PROGRAM PROGRAM / CLOCK-ADJ. 9 2. Press the B-SKIP or F-SKIP Buttons to select the song to be programmed. For example track 5 is selected. 3. Press the PROGRAM Button again to store the selection. The Program No. will advance to “P02” and then change to “00” and blink to prompt for another input. 4. Press the B-SKIP or F-SKIP Buttons to select the next song to be programmed. 5. Press the PROGRAM Button to store the second selection. You may repeat steps #2 - #4 to program as many as 20 tracks. 6. Press the CD PLAY/PAUSE Button to start playback in the programmed sequence. • After all the programmed tracks have been played, the player stops but the programmed tracks remain in the memory. • Press the PROGRAM Button followed by the PLAY/PAUSE Button to begin programmed playback again. 7. To cancel programmed play, in Stop mode press the STOP Button once or open the CD DOOR. 8. To turn the System off, press the POWER / STANDBY Button. The LCD backlight will go off. DOCKING YOUR iPod 1. Insert the universal adaptor for the type of iPod you will dock. 2. To remove the adaptor to exchange for the others, press at the back of the adaptor and pull it upward. 3. Press the POWER / STANDBY Button once to turn on the System. The LCD backlight will light. 4. Press the FUNCTION Button to select iPod mode. 5. Your iPod can now be inserted onto the iPod connector by aligning the connector on the bottom of the iPod onto the connector in the docking bay. Note: Please be careful when seating the iPod into the docking to avoid damaging the 30-pin connector on the iPod or in the Docking System. 6. The iPod will start playing automatically and also start charging. Note: The iPod will only be charged when the System is powered by AC. 7. Select the previous or next music tracks by pressing the B-SKIP or F-SKIP Buttons repeatedly, and press the PLAY/PAUSE Button to play or pause. Note: The System’s LCD cannot show any music information (e.g. song name) of your iPod. Please view the music information through your iPod display. 8. Adjust the sound level using the VOLUME CONTROL. Note: The volume level cannot be adjusted using the volume control on your iPod after docking. 9. To remove the iPod from the unit, press and hold the PLAY/PAUSE Button on the System for a few seconds or simply press the STOP Button once to switch off the device and then gently remove it from the dock connector. 10. To turn the Docking System off, press the POWER / STANDBY Button. The LCD backlight will go off. 10 AUX OPERATION You can playback your favorite music from your MP3 player or a portable...