|
Resumen del manual
The size and vent tuning frequency, if you're using a ported box, determine the low-frequency extension and output of the subwoofer. We have designed the ARC Audio subwoofer to perform well when used in both sealed and ported enclosures. The acoustics of your vehicle also influence bass response. The small interior size of most cars and trucks boosts low frequencies dramatically. You will need to use a smaller enclosure then normal to achieve a flat bass response. As a rule, below 50Hz (depending on cabin size), bass response increases at about 12dB per octave as the frequency decreases. This "Cabin Gain" adds significant bass output to the subwoofer system. We have given you two enclosure recommendations that are listed on the previous page. One sealed and one ported. The sealed enclosure design will, in most cases, give you the best sound quality and take up less space in your vehicle. The ported box design will offer more output then the sealed enclosure (about 3 - 4 dB more), but it will reduce the power handling and require more space to install. The recommended ported enclosure is not designed for “competition SPL” performance, it is designed for normal listening. It will increase the low frequencies output and increase the overall volume while still sounding good when properly tuned and installed. A Note About Power Handling ARC Audio woofers are designed to perform for years without any problems. The RMS power noted under the specifications is the recommended continuous power for long term use. All woofers make heat...
Otros modelos de este manual:Altavoces - ARC 10D4 (173.63 kb)
Altavoces - ARC 15D4 (173.63 kb)
Altavoces - ARC 8D2 (173.63 kb)
Altavoces - ARC 8D4 (173.63 kb)