Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
When using these stands, be sure to observe the following precautions: • Check the stand specification to be certain it is designed to support the weight of the speaker. Observe all safety precautions specified by the stand manufacturer. • Always verify that the stand is placed on a flat, level, and stable surface. • Route and secure cables so that performers, crew, and audience will not trip over them and pull the speaker over. • Be sure to fully extend the legs of tripod type stands. • Position the stand so that the legs do not present a trip hazard. • Do not attempt to place more than one speaker on a stand. • Always be cautious in windy, outdoor conditions. It may be necessary to place additional weight (i.e. sandbags) on the base of the stand to improve stability. Stacking speakers The following safety precautions should be observed when stacking VISION™ speakers: • Verify that the floor or stage on which the speakers will be stacked is flat, level and solid. • When used outdoors, be aware of winds that could tip a tall speaker stack over. • Position the speakers to minimize the possibility that performers, crew, or audience will bump into them. • Route and secure cables so that performers, crew, and audience will not trip over them and pull the speaker over. • Under extreme, high-SPL conditions speakers on a highly polished surface may “creep” (i.e. move due to the power of the acoustic energy) Precautions should be taken so that such creeping will not result in toppling of the speaker stack. Hearing damage, prolonged exposure to excessive SPL VISION™ Series loudspeakers are easily capable of generating sound pressure levels (SPL) sufficient to cause permanent hearing damage to performers, production crew and audience members. Proper precautions should be taken to avoid prolonged exposure to SPL in excess of 85dB. Exposure to moisture, outdoor applications VISION™ Series loudspeakers will deliver excellent results in outdoor sound reinforcement applications. However, they are not “weatherproof” and are not intended for continuous exposure to extremes of humidity, temperature, salt air, or UV rays. Exposure to outdoor environmental conditions may result in premature failure of components as well as degradation to appearance. ANTES DE EMPEZAR PRECAUCIONES DE SEGURIDAD Antes de usar su sistema de altavoces VISION™, lea la siguiente informacion importante sobre seguridad y proteccion de su inversion en altavoces de alta calidad. Colgado/suspension de sistemas VISION™ Los altavoces de la serie VISION™ estan disenados para aplicaciones en las cuales los altavoces se apilan directamente sobre el piso, escenario, bases para altavoces (solo la VIS-122), otros altavoces, o una plataforma solida y estable. Los modelos VIS-153, VIS-253 y VIS-122 de la serie VISION™ tienen tambien puntos de colgado ATM® que permiten colgar o suspender los altavoces. SOLO SE DEBEN SUSPENDER LOS ALTAVOCES DISENADOS ESPECIFICAMENTE PARA COLGADO O SUSPENSION. Para mas infor...
Otros modelos de este manual:Altavoces - VIS-218 (762.03 kb)
Altavoces - VIS-153 (762.03 kb)
Altavoces - VIS-36 (762.03 kb)
Altavoces - Vision VIS-253 (762.03 kb)