Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
on/off alm. set wake-to alm. reset snooze/dimmer volume power off Volume Wheel Dock iPod Button Set Wheel Radio Button AM/FM Select Button Sleep Button Alarm On/Off Button Alarm Set Button Wake-To Button Alarm Reset/Power Off Button Snooze/Dimmer Button AC Adaptor Jack Line in Jack Clock Adjust ButtonLine Out Jack FM Antenna AM Loop Antenna socket DST Switch DC 15V 1200mA time zone clock adj. DST -1 +1 line inline out am antenna Time Zone Button iH56 Display Battery Low Indicator Sleep Display Radio Frequency AM/FM Indicator Alarm Armed Daylight Saving Time Indicator Time/Alarm Display PM Indicator Wake To Indicator: iPod, Radio, Buzzer, iPod Indicator 2 Using the iH56 Connect iH56 to Power Source a) Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120v wall socket. The iH56 does not operate on batteries. Setting the Clock a) Press and hold the Time Zone Button until the display flashes. b) Turn the Set Wheel to select your time zone. c) Press the Time Zone Button again. The clock will display the current time in your time zone. d) To adjust the time for Daylight Saving Time, slide the DST switch to +1 to advance the time 1 hour. Slide to -1 to turn the clock back 1 hour. To Set Clock Manually a) Press and hold the Clock Adjust Button. The clock display will flash. b) Turn the Set Wheel until the current time is displayed (a PM indicator appears when time is set to PM; there is no AM indicator). c) Press the Clock Adjust Button to accept the time. The year display will flash. d) Turn the Set Wheel to adjust the year and press the Clock Adjust Button. The date display will flash. e) Turn the Set Wheel to adjust the date and press the Clock Adjust Button. Two beeps will indicate clock setting is complete. Using the Alarm Setting the Alarm a) Press and hold the Alarm Set Button until the alarm time flashes. b) Turn the Set Wheel to set the alarm time (a PM indicator appears when time is set to PM; there is no AM indicator). c) Press Alarm Set again. Alarm is now armed, indicated by the alarm clock icon and alarm source icon. d) At any time, press the Wake-To Button repeatedly to select an alarm source to wake to: iPod, radio or buzzer. Turning Alarm Function ON and OFF a) Press the Alarm On/Off Button to arm or disarm alarm function. When armed, alarm icon appears in display. Resetting the Alarm to Come on the Next Day a) When the alarm is sounding, press the Alarm Reset/Power Off Button to stop alarm and reset it to come on the following day. Snooze a) Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again 9 minutes later. Snooze can be pressed several times during the 1 hour alarm cycle. Sure Alarm The iH56 has a sure alarm feature so in the event of a power failure, the buzzer alarm will still sound (if backup batteries are installed). iPod Playing and charging your iPod a) Place proper insert for your iPod (see insert table on page 1) in Dock, then gently dock iPod. When docked, iPod will charge until fully charged. The iPod will not overcharge. Note: To remove insert, use thumbnail in slot on back of insert and pull up. b) Press the iPod Button to play iPod, and again to pause. c) Turn Volume Wheel to adjust iH56 volume up or down d) Press Alarm Reset/Power Off Button to turn iH56 and iPod off. 3 Using the iH56 Radio Setting up Antennas a) Snap AM loop antenna into provided stand, then plug antenna cable into AM Loop Antenna socket on back of unit. Move antenna 12” away from unit for best reception. b) Extend FM Antenna (on back of unit) fully for best reception. Do not strip, alter or attach to other antennas. Tuning and Playing the Radio a) Press the Radio Button to select radio play mode. b) Press the AM/FM Select Button to select AM or FM radio band. c) Turn the Set Wheel to tune radio to desired station. d) Turn the Volume Wheel to adjust iH56 volume up or down. e) Press Alarm Reset/Power Off Button to turn iH56 and iPod off. Using the Line-in and Line-out Jacks a) Use an audio patch cord (available at to play nondocking iPods or other audio devices through the iH56 Line-in Jack (one end in the device’s line out or headphones jack, the other in the iH56 line in jack). Make sure there is no iPod docked in the iH56 when using the line-in jack. Press the iPod Button until AUX appears on the display. b) Use the Line Out Jack to connect the iH56 to the line-in jack of other audio devices such as a tape recorder or amplifier. The Volume Wheel of the iH56 does not control line-out volume (adjust on attached device instead). Using Sleep Mode Sleep mode lets you sleep to your iPod or the radio, gradually lowering the volume until the unit shuts off at the selected time. a) Press the Sleep Button to select an amount of time before the iH56 will turn off: 120, 90, 60, 30 or 15 minutes. b) Turn the Volume Wheel to set the sleep volume (this volume setting is separate from your...
Otros modelos de este manual:Altavoces - iH56 (196.12 kb)