Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
pluilMJ rUciCJ ineeo InMrxICtlonr. CfKflMy PREFACE RAMSAs Stereo Input Module WU-SX04A is designed to use with the Audo Mixer WR-SX1A (WR SX1) series BEFORE INSTALLATION Be sure to set the address or internal switch appropriately before mounting this modde into the Audio M-xe^ WR-SX1A (WR SXi) series Othe'w se. the computer control can no: work correctly REFER TO THE OPERATING INSTRUCTIONS OF AUDIO MIXER WR-SX1A (WR-SX1) SERIES FOR THE DETAIL. SPECIFICATIONS Dimensions 31 (W) X 270 (H) x 930 (D) mm ( 1 • 1/4* (W) x 10-5/8’ (H) x 36-5/8* (D)J Weight 1 7kg (3 7fcs ) Weight and dimensions indcatea are approximate Specifications are subject to charge w thout notice. The serial number of this product may be found on the top of the unit, You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft Model No. WU SX04A Serial No WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Panasonic, Stereo Input Module WU-SX04A ■ To Users of the WR-SX1 Series • This module is for the WR-SX1A series. If you are a WR-SX1 series user, be sure to read the following instructions before installing the module. • If you do not know which series, SX1 or SX1A, you are using, it is shown on the front cover of the operating instructions or on the nameplate on the rear panel of the device. It can also be checked by model number. SX1 series: Model WR-SX1/“ (“ indicates the number of channels) SX1A series: Model WR-SX1A/** (** indicates the number of channels) [LEVEL MATCH LED colors have been changed.] • Starting with the SX1A series, the LEVEL MATCH LED lights in two colors. It lights green, as on the preceding models, when the fader position matches the fader value saved in the memory, but it lights red when the fader position exceeds the memory value. • The LEVEL MATCH LED can be modified to light in green only as on the preceding models if you wish to match it with the functions of the other modules installed in the device. The method of its modification is as follows: [Method] • Remove the Rl02'shown below by disconnecting it or cutting the lead at the root. Panasonic Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America RAMS A/Professional Audio Systems 3330 Cahuenga Blvd. West, Los Angeles, С A 90068 1-800-777-1146 PANASONIC CANADA INC. 5770 Ambler Drive, Mississauga. Ontario. L4W 2T3 Canada (905) 624-5010 NM0699-0 YWA8QA52Û8AN Printed in Japan...