Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Wake up to FM radio or music from your USB device or iPod.The clock time needs to be set first before the alarm clock can be used. 1 Press TIMER for more than 3 seconds to enter the alarm setting mode. . appears. . The alarm clock digits flash. . "Err" appears briefly if you have not set the clock time. 2 Press TUNING +/-to set the hours. 3 Press S/T to set the minutes. 4 Press iPod, TUNER or USB to select the sound source. 5 Press TIMER to confirm your alarm setting. . The display returns to the clock time. Notes: The TUNER mode is the default source if: –Your USB device contains no MP3 or WMA files. –You forgot to connect a USB device. –You forgot to dock your iPod. Stopping the alarm . To cancel the alarm, press TIMER in standby or playback mode. . appears if activated, and disappears if deactivated. Sleep timer setting The sleep timer enables the system to switch off by itself after a set period of time. 1 Press SLEEP on the remote control repeatedly to select a preset time. . The selections are as follows (time in minutes): 120 ™ 90 ™ 60 ™ 30™ 15 ™OFF… .SLEEP is displayed. 2 To review the remaining sleep time, press SLEEP . Note: – If you press SLEEP again, this will change your sleep time period to the next shorter preset option. To deactivate the sleep timer . Press SLEEP repeatedly until "0FF" is displayed, or press Power. 20 iPod Dock Compatible iPod players . The docking enter tainment system is compatible with all the existing Apple iPod models with 30pin connector. Selecting the correct dock adaptor . Four adapters are included to fit different iPod models including iPod touch (8GB, 16GB), iPod classic (80GB, 160GB), iPod nano 3rd generation (4GB, 8GB), iPod the 5th generation (30GB, 60GB, 80GB), iPod nano 2nd generation (2GB, 4GB, 8GB) and iPod nano 1st generation (1GB, 2GB, 4GB ). Using the dock adaptors . Before plugging your player in the dock, snap the suitable dock adapter into the dock to provide a snug fit for the player to be docked Playing an iPod portable player 1 Correctly dock your iPod por table player in the cradle. Make sure the dock adaptor is compatible. . Make sure that you have powered on your iPod player before selecting iPod source. 2 Press iPod on the remote control to select iPod source. . The iPod dock icon appears. 3 Playback starts automatically. Playback functions play, skip, fast search and, pause are possible using the controls on this system and its remote control. Charging iPod battery using the dock . In iPod mode, directly dock your iPod por table player on the cradle for charging. Note: –For the purpose of saving power, recharging of your USB device and iPod is Not Supported when the main set is in Eco Power mode. English 21 Specifications English AMPLIFIER Output power ........................................................................ ...................................................................... 50W+2 x 25W Signal-to-noise ratio ....................................... . 70 dBA Frequency response ...... 50 Hz – 20 KHz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) SUBWOOFER Frequency response ............................ 50 Hz – 1KHz Impedance ........................................................................ 8 . Rated power ................................................................ 50W TWEETER Frequency response ..................... 160 Hz – 16 KHz Impedance ........................................................................ 4 . Rated power ........................................................ 2 x 25W TUNER FM wave range ................................... 87.5 – 108 MHz Sensitivity at 75 . – FM ................................................................................ 20dBf Total harmonic distor tion ..................................... . 1% Frequency response – FM .............................................................. 63 – 6000 Hz Signal-to-noise-ratio – FM ....................................................................... . 50 dBA USB PLAYER USB ................................................................... 12Mb/s, V1.1 ......................................... suppor t MP3 and WMA files Number of albums/folders ................. maximum 99 Number of tracks/titles ...................... maximum 999 GENERAL INFORMATION AC Power ............................. 220 – 240 V / 50-60 Hz Dimensions (w x h x d)300 x 300 x 1024 (mm) Weight ......................................................................... 10.1 kg Standby power consumption ............................ <7 W Specifications are subject to change without notice. 22 Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult y...