Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
This equipment should not be used for such purposes. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Note ••The type plate is located on the bottom of the apparatus. EN 2 Your Docking Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Introduction With this docking speaker, you can enjoy audio from the iPod/iPhone and other audio devices. What's in the box Check and identify the contents of your package: • Main unit • 1 x AC adaptor • Quick start guide Overview of the main unit a iPod/iPhone dock b • Adjust the brightness of bottom light. c / • Adjust volume. d Display e • Charge your iPod/iPhone through USB cable. f Power supply socket • connect AC power. g CLOCK • Adjust the brightness of Display. h Bottom light abcdefgh EN 3 Get started Caution ••Use of controls,adjustments,or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect power Caution ••Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the unit. ••Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. ••Before connecting the AC adaptor, Make sure that you have completed all other connections. Connect the AC power adaptor to: • the power supply socket on the back of the docking speaker. • the wall power outlet. Turn on In standby mode, the docking speaker turns on automatically when it detects an audio signal from docked iPod/iPhone. Switch to standby mode The unit switches to standby mode if there is no audio signal from docked iPod/iPhone over 15 minutes. EN 4 Play Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker supports the following iPod/iPhone models. Made for : • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone • iPod classic • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPod touch(1st, 2nd, 3rd, and 4th generation) • iPod mini Load the iPod/iPhone • Insert your iPod/iPhone into the dock. »»The docking speaker synchronizes the time from the docked iPod/iPhone. To remove the iPod/iPhone • Pull your iPod/iPhone out of the dock. Listen to the iPod/iPhone Note ••Make sure that the iPod/iPhone is loaded correctly. • Start music play in your iPod/iPhone. »»You can hear music from this docking speaker. EN Charge the iPod/iPhone When the docking speaker is connected to wall power outlet, the docked iPod/iPhone begins to charge. • Your can also connect your iPod/iPhone to the USB socket in the docking speaker to charge. Adjust volume level • During play, press VOL +/- to increase or decrease the volume level. »»The volume level shows in the display. Adjust brightness • Press CLOCK repeatedly to select different levels of display brightness. • Press repeatedly to select different levels of bottom light brightness. 5 Product information Note ••Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2X2 W RMS Signal to Noise Ratio 77 dB General information AC power (power adaptor) S018KV0590240 (Philips) Input: 100-240V, 50/60Hz, 500mA; Output: 5.9V 2400mA; Operation Power Consumption 18W Dimensions - Main Unit (W x H x D) 176.4 x 176.4 x77.3mm Weight - Main Unit 0.88 kg EN 6 Troubleshooting Warning ••Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power ••Make sure that the AC power plug of the unit is connected properly. ••Make sure that there is power at the AC outlet. No sound ••Adjust the volume. No response from the unit ••Disconnect and reconnect the AC power plug, then turn on the docking speaker again. EN Specifications are subject...