Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Notes : -On a disc containing PAL recordings, no NTSC recordings can be made and vice versa. On an empty disc, either type of recordings can be made. -No recordings can be made from so-called ‘Pseudo-PAL’ or PAL-60 sources. stop 11:15 01 B B C 1 Disc is not a DVD video disc Press OK to open tray or press REC to erase disc ‰ A disc can hold up to 48 titles (including empty titles). When this maximum is reached the on- screen message ‘Too many titles’ appears, if you want to make a new recording. You have to erase a title first next to an empty title. See ‘Managing Disc Content’. 30 RECORDING Manual recording Checking input Normally, the DVD recorder displays the contents of the disc on screen. l Press MONITOR in order to switch to the internal tuner, or whichever other source is selected, if you want to check the input before starting a recording. ‰ On the TV screen, you will see the actual picture quality that you will get if you record: the video has been encoded and decoded again. This is why you will see a delay of about 1.5 seconds when using a ‘live’ source such as a camera. l In monitor mode you can choose programme numbers directly with the digit keys 0-9 on the remote control. l Press SELECT repeatedly to select the desired record mode. l Press MONITOR again to go back to disc mode. Recording l Insert a recordable DVD+RW or DVD+R disc. l Normally, the DVD Recorder displays the contents of the disc on the screen. l Use the MONITOR key to see the currently selected TV channel. l Use CHANNEL 3 or CHANNEL 4 (on the recorder) or CH+, CH-(on the remote control) to select the programme number (programme name) from which you wish to record. ‰ When a TV channel transmits a channel name, it will be shown on the display. MONITOR ON/OFF REC/OTR PLAYSTOP FSS FORWARDREVERSE NEXTPREVIOUS PAUSE SLOW CHVOL MUTE T/C A/CH The following programme numbers are provided for recording from external sources: ‘EXT1’ : TV set via SCART 1 socket ‘EXT2’ : for recording from external sources via SCART 2 socket ’EXT3’ : rear S-video ‘EXT4’ : rear CVBS ‘CAM1’ : front S-video (Y/C) ‘CAM2’ : front Video (CVBS) l Press RECORD (on the recorder) or REC/OTR (on the remote control). ‰ RECORD is shown on the display. ‰ The status box is shown on the screen for a few seconds. l To bring back the status box during recording press SYSTEM MENU. Pressing SYSTEM MENU once more will remove the status box again. l Press ; PAUSE to pause recording. You can resume recording by pressing ; PAUSE once more. The DVD recorder will make a seamless connection. l Press 9 STOP to stop recording. If you are recording from a camcorder watch the video output of the DVD recorder on the TV - instead of the camcorder viewer - to determine the right moment to stop. l The Index Picture Screen is updated. ‰ ‘MENU UPDATE’ is shown on the display. l After a short recording on a new DVD+RW disc, a few minutes will be needed to complete the formatting of the disc. Safe Record When you start recording on a DVD+RW disc by briefly pressing the RECORD or REC/OTR key, a recording on DVD+RW will be made from the current position of the disc pointer. To prevent this do the following: l Hold the RECORD key (on the recorder) or REC/OTR key (on the remote control) press for about two seconds until ‘SAFE RECORD’ appears on the display. English RECORDING 31 English l The recorder automatically jumps to the end of the last title on the disc and starts recording. ‰ If no free space is left. The display will show ‘DISC FULL’. Safe record is not possible then. Recordings on DVD+R are always automatically made after the last title on the disc. Direct Record With Direct Record you can start recording immediately from the programme selected on the TV set. l Make sure ‘Direct Record’ is switched ‘On’. (See record settings). l On the TV set, select the programme number you want make the recording from. l Make sure the DVD recorder is switched to standby. l Press RECORD (on the recorder) or REC/OTR (on the remote control). Notes : -Don’t select another programme number on your TV set, until the ‘WAIT’ on the display of your DVD recorder disappears. This can take up to one minute. -When ‘NOTV’ appears on the display, the programme number could not be found. The DVD recorder switches off automatically. -If your loudspeakers are connected (via an amplifier / receiver) to your DVD recorder, the sound will be delayed relative to the TV picture when recording directly from the TV set. -You can use Direct Record in combination with Safe Record. Manual audio control You can control the audio recording level of your DVD recorder manually. l In monitor mode, press AUTO/MAN REC VOLUME on the DVD recorder. ‰ The display will show the current audio level and MANUAL appears. SP CHANNEL DVD RW TITLE CHAPTER TIME REMAIN -30-40 -10-20 0 OVER-30-40 -10-20 0 OVER STEREO RECORD MANUAL l Adjust the recording level with MANUAL 3 or 4 on the DVD recorder, so that the ‘0 dB’ mark lights up during the loudest parts ...
Otros modelos de este manual:Altavoces - DVDR980/001 (3.16 mb)