Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
• When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the batter y compar tment is completely secure after you replace the batter y. • If the batter y compar tment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. EN 4 2 Your Docking Overview of the main unit Speaker Congratulations on your purchase, and c def welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at a b Introduction With this docking speaker, you can • enjoy audio from the iPod/iPhone, and other external audio devices; and • synchronize the iPod/iPhone with your computer through USB socket. What's in the box Check and identify the contents of your package: • Main unit • Remote control (with batter y) • AC power adaptor • Quick star t guide • Safety sheet a Dock for the iPod/iPhone b / • Adjust volume. • As LED indicators, show system status. c • Turn the docking speaker on or off. • Switch the docking speaker to standby mode. d Power supply socket • Connect AC power. e • Sync with PC through a USB cable. f MP3-LINK • Connect an external audio device. 5 EN Overview of the remote control abcdef a • Select iPod/iPhone dock mode. b / • Skip to a track. • Search within play. / • Adjust volume. d • Mute or restore volume. e • Star t or pause play. f • Select MP3 link mode. EN 6 3 Get started Always follow the instructions in this chapter in sequence. Prepare the remote control For first-time use: Remove the protective tab to activate the remote control battery. To replace the remote control battery: 1 Open the battery compartment. 2 Insert one CR2025 battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. 123123 Connect power This docking speaker can be powered on by either AC power or batteries. Option 1:AC power Caution • Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. Connect the AC power adaptor to: • the power socket at the back of the docking speaker. • the wall socket. Option 2: Battery power Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Batteries contain chemical substances, so they should be disposed of properly. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 1 Open the battery compartment. 2 Insert 4 x 1.5 V AA batteries (not supplied) with correct polarity (+/-) as indicated. 3 Close the battery compartment. 7 EN Turn on Press to turn the docking speaker on. » The / LED indicators light up. Switch to standby mode The docking speaker switches to standby mode in following situations: • Press again; • The speaker is idle for 15 minutes when powered by AC supply. • The iPod/iPhone or external audio device is disconnected when the speaker is operated on batteries. » The / LED indicators light off. Note • In standby mode, if you press or on the remote control, the docking speaker switches to the corresponding selected source. EN 8 4 Play Play from iPod/iPhone You can enjoy audio from your iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker suppor ts the following iPod and iPhone models: Made for. • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod classic • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Listen to the iPod/iPhone Philips DockStudio app brings a suite of new features to your docking speaker, including Internet radio and a multi-function alarm clock. To enjoy more features, you are recommended 5 Launch the app after the installation. to install this free application. 6 Play audio on your iPod/iPhone. 1 Inser t the iPod/iPhone into the dock. » Audio comes out through this docking » The docking system switches to Dock speaker. source automatically. » The LED indicators light up. Tip • You can press on the remote control to select Dock source. 2Forfirst-timeuse,youwillbeaskedto install DockStudio app on your iPod/ iPhone. 3 Tap [Yes] (yes) to accept the installation request. 4Follow the on-screen instructions to complete the installation. 9 EN Note • With the DockStudio app, you can enjoy music, set clock and alarm, adjust sound settings, and update firmware if necessar y. • To pause or resume play, press . • To skip to a track, press / . • To search during play, press and hold / , and then release to resume normal play. Update firmware If firmware update is available, the DockStudio app will search for it automatically and ask you to download it. Note • Make sure that your iPod/iPhone is inser ted in the docking speaker and connected to the Internet. 1 If a new firmware update is found, tap OK. 2 Follo...