Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
To enjoy more features, you are recommended to install this free application. 1 Switch the power button to ON position. » The LED indicator lights up. 2 Inser t the iPod/iPhone into the dock. 3 For first-time use, you will be asked to install DockStudio app on your iPod/ iPhone. 4 Tap [Yes] (yes) to accept the installation request. 5 Follow the on-screen instructions to complete the installation. 6 Launch the app after the installation. 7 Play audio on your iPod/iPhone. » You can hear audio from this docking speaker. Charge the iPod/iPhone When the docking speaker is connected to power, the docked iPod/iPhone begins to charge automatically. Play from Bluetooth device Pair with Bluetooth devices Note • Before you connect a Bluetooth device to this docking speaker, familiarize yourself with the Bluetooth capabilities of the device. • The effective operation range between the docking system and the paired device is approximately 10 meters (30 feet). • Keep this docking speaker away from other electronic devices that may cause interference. 1 Press Bluetooth to select Bluetooth source. » The Bluetooth button blinks. 2 Turn on Bluetooth function on your device. • Different devices may have different way to activate Bluetooth. EN 3 Scan Bluetooth devices that can pair with your device. 4 When “DS7530” is displayed on your device, select it to star t connection. » Double beep tone confirmation is heard and the Bluetooth button stops blinking if connection is successful. » A different Bluetooth icon is displayed on your device. 5 Play music in your device. » Music comes through the docking speaker. Tip • If your Bluetooth device has been paired with DS7530 before, you just need to find out “DS7530” on your Bluetooth menu, then confirm the connection. To disconnect Bluetooth: • Press Bluetooth on the docking speaker again. • Deactivate Bluetooth function on your device or move it beyond the communication range. Play from an external audio device With this docking speaker, you can also enjoy audio from an external device such as an MP3 player. Note • Make sure that no iPod/iPhone is docked in the docking speaker. 1 Connect an MP3 link cable (not supplied) to: • the AUX IN socket at the back of the docking speaker. • the headphone socket on an external device. 2 Play music on the device (see the device's user manual). Adjust volume During play, press - VOLUME + to adjust volume. EN Weight 5 Product -Main Unit 0.28 kg information Note • Product information is subject to change without prior notice. Specifications Amplifier Total Output Power 2 x 5 W RMS Signal to Noise Ratio >60 dBA MP3 Link 0.6 V RMS 22 kohm Bluetooth Standard Bluetooth Standard Version 2.1+EDR Output power 4 dBm (Class 2) Frequency band 2.402 ~ 2.480 GHzISM Band Range 10 m (free space) General information AC Power Model: S018KV0900200 (Philips); Input: 100-240 V ~ 50/60Hz, 500mA; Output: 9.0 V 2000 mA Operation Power Consumption <18 W Eco Standby Power Consumption <0.5 W Max. load for iPod/ iPhone 5 V 1 A Dimensions -Main Unit (W x H x D) 311 x 111 x 37.6mm EN 6 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this device, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips Web page (t). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power • Ensure that the AC power plug of the unit is connected properly. • Ensure that there is power at the AC outlet. No sound • Adjust the volume. No response from the unit • Disconnect and reconnect the AC power plug, then turn on the unit again. About Bluetooth device Music playback is unavailable on the system even after successful Bluetooth connection. • The device cannot be used with the system to play music. The audio quality is poor after connection with a Bluetooth-enabled device. • The Bluetooth reception is poor. Move the device closer to the system or remove any obstacle between the device and the system. Cannot connect with the system. • The device does not suppor t the profiles required for the system. • The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function. • The system is not in the pairing mode. • The system is already connected with another Bluetooth-enabled device. Disconnect that device or all other connected devices and then tr y again. The paired device connects and disconnects constantly. • The Bluetooth reception is poor. Move the device closer to the system or remove any obstacle between the device and the system. • For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of the system. EN 7 Notice Any changes or modifications made to this device that are not expressly approv...