Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 648.89 kb Nombre del archivo: Idioma del manual:

Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Note ••The type plate is located on the bottom of the apparatus. 2 Your Bluetooth Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Introduction With this speaker, you can enjoy audio from the compatible Bluetooth device or your PC/ Mac. 3 Get started Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Power supply The speaker can operate on built-in rechargeable battery. To recharge the built-in battery: Connect micro USB socket() with PC through supplied USB cable. »»The power indicator() turns on.(white) • The power indicator turns off when it’s fully charged. The carabiner The carabiner() is used for easy carrying or hanging, not for climbing support or fall protection. 4 Play Play from a Bluetooth device Note ••The effecitve operation range between the speaker and your Bluetooth device is approximately 10 meters (30 feet). 1 Slide () towards to select Bluetooth audio source. »»The Bluetooth indicator() flashes.(Blue) 2 Activate the Bluetooth function in your Bluetooth device. 3 Select “PHILIPS SBT30” on your Bluetooth device for pairing. »»The speaker beeps twice and the Bluetooth indicator() stays steadily on.(Blue) • For some devices, you may need to input “0000” as pairing password. 4 Start music play on your Bluetooth device. When there is an incoming call: • Press Bluetooth button(4) to pick up the call. • Press Bluetooth button(4) again to hang up the call. Tip ••You can speak to the MIC() to get the best speakerphone performance. Play from an external device 1 Slide () towards AUX to select Aux-in audio source. »»The power indicator() turns white. 2 Connect your speaker with an external device throught the supplied USB cable. 3 Start music play on your device. 5 Product information Note ••Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2W RMS Signal to Noise Ratio >70dB Aux-in Link 600 mV RMS, 10 kohm Bluetooth Bluetooth specification V2.1+EDR Supported Profiles HFPv1.6, A2DPv1.2, HSPv1.2 Advanced features Echo and noise cancellations Range 10 m/33 feet line of sight General information DC power input USB: 5V, 500mA; Built-in Li-Polymer battery 3.7V 500mAH Battery working time >8 hours Dimensions-Main Unit (diameter x height) D68mm * H81mm Weight- Main Unit 0.14 kg 6 Troubleshooting Warning ••Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the follow...

Descargar ahora

Introduzca dos números de la imagen: